{\rtf1\ansi\ansicpg1252\cocoartf1138\cocoasubrtf510
{\fonttbl\f0\fswiss\fcharset0 Helvetica;}
{\colortbl;\red255\green255\blue255;}
\margl1440\margr1440\vieww33400\viewh16600\viewkind0
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\pardirnatural

\f0\fs24 \cf0 # This is a configuration file for Zabbix Server process\
# To get more information about Zabbix,\
# visit http://www.zabbix.com\
\
############ GENERAL PARAMETERS #################\
\
### Option: NodeID\
#	Unique NodeID in distributed setup.\
#	0 - standalone server\
#\
# Mandatory: no\
# Range: 0-999\
# Default:\
NodeID=1\
\
### Option: ListenPort\
#	Listen port for trapper.\
#\
# Mandatory: no\
# Range: 1024-32767\
# Default:\
# ListenPort=10051\
\
### Option: SourceIP\
#	Source IP address for outgoing connections.\
#\
# Mandatory: no\
# Default:\
SourceIP=10.7.17.20\
\
### Option: LogFile\
#	Name of log file.\
#	If not set, syslog is used.\
#\
# Mandatory: no\
# Default:\
# LogFile=\
\
LogFile=/var/log/zabbix/zabbix_server.log\
\
### Option: LogFileSize\
#	Maximum size of log file in MB.\
#	0 - disable automatic log rotation.\
#\
# Mandatory: no\
# Range: 0-1024\
# Default:\
LogFileSize=256\
\
### Option: DebugLevel\
#	Specifies debug level\
#	0 - no debug\
#	1 - critical information\
#	2 - error information\
#	3 - warnings\
#	4 - for debugging (produces lots of information)\
#\
# Mandatory: no\
# Range: 0-4\
# Default:\
DebugLevel=2\
\
### Option: PidFile\
#	Name of PID file.\
#\
# Mandatory: no\
# Default:\
PidFile=/var/run/zabbix/zabbix_server.pid\
\
### Option: DBHost\
#	Database host name.\
#	If set to localhost, socket is used for MySQL.\
#	If set to empty string, socket is used for PostgreSQL.\
#\
# Mandatory: no\
# Default:\
# DBHost=localhost\
DBHost=monitordb001.xxxx.com\
\
### Option: DBName\
#	Database name.\
#	For SQLite3 path to database file must be provided. DBUser and DBPassword are ignored.\
#\
# Mandatory: yes\
# Default:\
# DBName=\
\
DBName=zabbix\
\
### Option: DBSchema\
#	Schema name. Used for IBM DB2.\
#\
# Mandatory: no\
# Default:\
# DBSchema=\
\
### Option: DBUser\
#	Database user. Ignored for SQLite.\
#\
# Mandatory: no\
# Default:\
# DBUser=\
\
DBUser=zabbix\
\
### Option: DBPassword\
#	Database password. Ignored for SQLite.\
#	Comment this line if no password is used.\
#\
# Mandatory: no\
# Default:\
# DBPassword=\
DBPassword=xxxxx\
\
### Option: DBSocket\
#	Path to MySQL socket.\
#\
# Mandatory: no\
# Default:\
# DBSocket=/tmp/mysql.sock\
\
### Option: DBPort\
#	Database port when not using local socket. Ignored for SQLite.\
#\
# Mandatory: no\
# Range: 1024-65535\
# Default (for MySQL):\
# DBPort=3306\
\
############ ADVANCED PARAMETERS ################\
\
### Option: StartPollers\
#	Number of pre-forked instances of pollers.\
#\
# Mandatory: no\
# Range: 0-1000\
# Default:\
# StartPollers=5\
StartPollers=100\
\
### Option: StartIPMIPollers\
#	Number of pre-forked instances of IPMI pollers.\
#\
# Mandatory: no\
# Range: 0-1000\
# Default:\
# StartIPMIPollers=0\
StartIPMIPollers=6\
\
### Option: StartPollersUnreachable\
#	Number of pre-forked instances of pollers for unreachable hosts (including IPMI).\
#\
# Mandatory: no\
# Range: 0-1000\
# Default:\
# StartPollersUnreachable=1\
StartPollersUnreachable=12\
\
### Option: StartTrappers\
#	Number of pre-forked instances of trappers.\
#\
# Mandatory: no\
# Range: 0-1000\
# Default:\
# StartTrappers=5\
StartTrappers=12\
\
### Option: StartPingers\
#	Number of pre-forked instances of ICMP pingers.\
#\
# Mandatory: no\
# Range: 0-1000\
# Default:\
# StartPingers=1\
StartPingers=18\
\
### Option: StartDiscoverers\
#	Number of pre-forked instances of discoverers.\
#\
# Mandatory: no\
# Range: 0-250\
# Default:\
# StartDiscoverers=1\
\
### Option: StartHTTPPollers\
#	Number of pre-forked instances of HTTP pollers.\
#\
# Mandatory: no\
# Range: 0-1000\
# Default:\
# StartHTTPPollers=1\
StartHTTPPollers=8\
\
### Option: JavaGateway\
#	IP address (or hostname) of Zabbix Java gateway.\
#	Only required if Java pollers are started.\
#\
# Mandatory: no\
# Default:\
# JavaGateway=\
\
### Option: JavaGatewayPort\
#	Port that Zabbix Java gateway listens on.\
#\
# Mandatory: no\
# Range: 1024-32767\
# Default:\
# JavaGatewayPort=10052\
\
### Option: StartJavaPollers\
#	Number of pre-forked instances of Java pollers.\
#\
# Mandatory: no\
# Range: 0-1000\
# Default:\
# StartJavaPollers=0\
\
### Option: SNMPTrapperFile\
#	Temporary file used for passing data from SNMP trap daemon to the server.\
#	Must be the same as in zabbix_trap_receiver.pl or SNMPTT configuration file.\
#\
# Mandatory: no\
# Default:\
SNMPTrapperFile=/tmp/zabbix_traps.tmp\
\
### Option: StartSNMPTrapper\
#	If 1, SNMP trapper process is started.\
#\
# Mandatory: no\
# Range: 0-1\
# Default:\
StartSNMPTrapper=1\
\
### Option: ListenIP\
#	List of comma delimited IP addresses that the trapper should listen on.\
#	Trapper will listen on all network interfaces if this parameter is missing.\
#\
# Mandatory: no\
# Default:\
# ListenIP=0.0.0.0\
\
# ListenIP=127.0.0.1\
\
### Option: HousekeepingFrequency\
#	How often Zabbix will perform housekeeping procedure (in hours).\
#	Housekeeping is removing unnecessary information from history, alert, and alarms tables.\
#\
# Mandatory: no\
# Range: 1-24\
# Default:\
# HousekeepingFrequency=1\
HousekeepingFrequency=24\
\
### Option: MaxHousekeeperDelete\
#	The table "housekeeper" contains "tasks" for housekeeping procedure in the format:\
#	[housekeeperid], [tablename], [field], [value].\
#	No more than 'MaxHousekeeperDelete' rows (corresponding to [tablename], [field], [value])\
#	will be deleted per one task in one housekeeping cycle.\
#	SQLite3 does not use this parameter, deletes all corresponding rows without a limit.\
#	If set to 0 then no limit is used at all. In this case you must know what you are doing!\
#\
# Mandatory: no\
# Range: 0-1000000\
# Default:\
# MaxHousekeeperDelete=500\
\
### Option: DisableHousekeeping\
#	If set to 1, disables housekeeping.\
#\
# Mandatory: no\
# Range: 0-1\
# Default:\
# DisableHousekeeping=0\
\
### Option: SenderFrequency\
#	How often Zabbix will try to send unsent alerts (in seconds).\
#\
# Mandatory: no\
# Range: 5-3600\
# Default:\
# SenderFrequency=30\
\
### Option: CacheSize\
#	Size of configuration cache, in bytes.\
#	Shared memory size for storing host, item and trigger data.\
#\
# Mandatory: no\
# Range: 128K-1G\
# Default:\
# CacheSize=8M\
CacheSize=128M\
\
### Option: CacheUpdateFrequency\
#	How often Zabbix will perform update of configuration cache, in seconds.\
#\
# Mandatory: no\
# Range: 1-3600\
# Default:\
# CacheUpdateFrequency=60\
\
### Option: StartDBSyncers\
#	Number of pre-forked instances of DB Syncers\
#\
# Mandatory: no\
# Range: 1-100\
# Default:\
# StartDBSyncers=4\
StartDBSyncers=12\
\
### Option: HistoryCacheSize\
#	Size of history cache, in bytes.\
#	Shared memory size for storing history data.\
#\
# Mandatory: no\
# Range: 128K-1G\
# Default:\
# HistoryCacheSize=8M\
HistoryCacheSize=128M\
\
### Option: TrendCacheSize\
#	Size of trend cache, in bytes.\
#	Shared memory size for storing trends data.\
#\
# Mandatory: no\
# Range: 128K-1G\
# Default:\
# TrendCacheSize=4M\
TrendCacheSize=64M\
\
### Option: HistoryTextCacheSize\
#	Size of text history cache, in bytes.\
#	Shared memory size for storing character, text or log history data.\
#\
# Mandatory: no\
# Range: 128K-1G\
# Default:\
# HistoryTextCacheSize=16M\
HistoryTextCacheSize=64M\
\
### Option: NodeNoEvents\
#	If set to '1' local events won't be sent to master node.\
#	This won't impact ability of this node to propagate events from its child nodes.\
#\
# Mandatory: no\
# Range: 0-1\
# Default:\
# NodeNoEvents=0\
\
### Option: NodeNoHistory\
#	If set to '1' local history won't be sent to master node.\
#	This won't impact ability of this node to propagate history from its child nodes.\
#\
# Mandatory: no\
# Range: 0-1\
# Default:\
# NodeNoHistory=0\
\
### Option: Timeout\
#	Specifies how long we wait for agent, SNMP device or external check (in seconds).\
#\
# Mandatory: no\
# Range: 1-30\
# Default:\
# Timeout=3\
Timeout=5\
\
### Option: TrapperTimeout\
#	Specifies how many seconds trapper may spend processing new data.\
#\
# Mandatory: no\
# Range: 1-300\
# Default:\
# TrapperTimeout=300\
\
### Option: UnreachablePeriod\
#	After how many seconds of unreachability treat a host as unavailable.\
#\
# Mandatory: no\
# Range: 1-3600\
# Default:\
# UnreachablePeriod=45\
\
### Option: UnavailableDelay\
#	How often host is checked for availability during the unavailability period, in seconds.\
#\
# Mandatory: no\
# Range: 1-3600\
# Default:\
# UnavailableDelay=60\
\
### Option: UnreachableDelay\
#	How often host is checked for availability during the unreachability period, in seconds.\
#\
# Mandatory: no\
# Range: 1-3600\
# Default:\
# UnreachableDelay=15\
\
### Option: AlertScriptsPath\
#	Full path to location of custom alert scripts.\
#	Default depends on compilation options.\
#\
# Mandatory: no\
# Default:\
# AlertScriptsPath=$\{datadir\}/zabbix/alertscripts\
AlertScriptsPath=/usr/local/zabbix/bin\
\
### Option: ExternalScripts\
#	Full path to location of external scripts.\
#	Default depends on compilation options.\
#\
# Mandatory: no\
# Default:\
# ExternalScripts=$\{datadir\}/zabbix/externalscripts\
\
### Option: FpingLocation\
#	Location of fping.\
#	Make sure that fping binary has root ownership and SUID flag set.\
#\
# Mandatory: no\
# Default:\
FpingLocation=/usr/sbin/fping\
\
### Option: Fping6Location\
#	Location of fping6.\
#	Make sure that fping6 binary has root ownership and SUID flag set.\
#	Make empty if your fping utility is capable to process IPv6 addresses.\
#\
# Mandatory: no\
# Default:\
# Fping6Location=/usr/sbin/fping6\
\
### Option: SSHKeyLocation\
#	Location of public and private keys for SSH checks and actions\
#\
# Mandatory: no\
# Default:\
# SSHKeyLocation=\
\
### Option: LogSlowQueries\
#	How long a database query may take before being logged (in milliseconds).\
#	0 - don't log slow queries.\
#\
# Mandatory: no\
# Range: 1-3600000\
# Default:\
# LogSlowQueries=0\
\
### Option: TmpDir\
#	Temporary directory.\
#\
# Mandatory: no\
# Default:\
# TmpDir=/tmp\
\
### Option: Include\
#	You may include individual files or all files in a directory in the configuration file.\
#	Installing Zabbix will create include directory in /usr/local/etc, unless modified during the compile time.\
#\
# Mandatory: no\
# Default:\
# Include=\
\
# Include=/usr/local/etc/zabbix_server.general.conf\
# Include=/usr/local/etc/zabbix_server.conf.d/\
\
### Option: StartProxyPollers\
#	Number of pre-forked instances of pollers for passive proxies.\
#\
# Mandatory: no\
# Range: 0-250\
# Default:\
# StartProxyPollers=1\
\
### Option: ProxyConfigFrequency\
#	How often Zabbix Server sends configuration data to a Zabbix Proxy in seconds.\
#	This parameter is used only for proxies in the passive mode.\
#\
# Mandatory: no\
# Range: 1-3600*24*7\
# Default:\
# ProxyConfigFrequency=3600\
\
### Option: ProxyDataFrequency\
#	How often Zabbix Server requests history data from a Zabbix Proxy in seconds.\
#	This parameter is used only for proxies in the passive mode.\
#\
# Mandatory: no\
# Range: 1-3600\
# Default:\
# ProxyDataFrequency=1}