Sensor ID : Ambient Temp (0x32) Entity ID : 12.1 (Front Panel Board) Sensor Type (Analog) : Temperature Sensor Reading : 17 (+/- 0) degrees C Status : ok Nominal Reading : 21.000 Upper non-recoverable : 45.000 Upper critical : 41.000 Upper non-critical : 38.000 Positive Hysteresis : 4.000 Negative Hysteresis : Unspecified Minimum sensor range : Unspecified Maximum sensor range : Unspecified Event Message Control : Per-threshold Readable Thresholds : unc ucr unr Settable Thresholds : Threshold Read Mask : unc ucr unr Assertion Events : Assertions Enabled : unc+ ucr+ unr+ Deassertions Enabled : unc+ ucr+ unr+ Sensor ID : Altitude (0x33) Entity ID : 12.1 (Front Panel Board) Sensor Type (Analog) : Other Sensor Reading : 360 (+/- 0) feet Status : ok Nominal Reading : 520.000 Positive Hysteresis : 80.000 Negative Hysteresis : 80.000 Minimum sensor range : Unspecified Maximum sensor range : Unspecified Event Message Control : Per-threshold Readable Thresholds : Settable Thresholds : Assertion Events : Assertions Enabled : Sensor ID : Avg Power (0x2e) Entity ID : 21.0 (Power Management) Sensor Type (Analog) : Current Sensor Reading : 70 (+/- 0) Watts Status : ok Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Minimum sensor range : 2550.000 Maximum sensor range : Unspecified Event Message Control : Per-threshold Readable Thresholds : No Thresholds Settable Thresholds : No Thresholds Assertion Events : Assertions Enabled : Sensor ID : Planar 3.3V (0x16) Entity ID : 7.1 (System Board) Sensor Type (Analog) : Voltage Sensor Reading : 3.266 (+/- 0) Volts Status : ok Nominal Reading : 3.309 Upper critical : 3.564 Lower critical : 3.039 Positive Hysteresis : 0.028 Negative Hysteresis : 0.028 Minimum sensor range : Unspecified Maximum sensor range : Unspecified Event Message Control : Per-threshold Readable Thresholds : lcr ucr Settable Thresholds : lcr ucr Threshold Read Mask : lcr ucr Assertion Events : Assertions Enabled : lcr- ucr+ Deassertions Enabled : lcr- ucr+ Sensor ID : Planar 5V (0x17) Entity ID : 7.1 (System Board) Sensor Type (Analog) : Voltage Sensor Reading : 4.882 (+/- 0) Volts Status : ok Nominal Reading : 4.995 Upper critical : 5.582 Lower critical : 4.475 Positive Hysteresis : 0.045 Negative Hysteresis : 0.045 Minimum sensor range : Unspecified Maximum sensor range : Unspecified Event Message Control : Per-threshold Readable Thresholds : lcr ucr Settable Thresholds : lcr ucr Threshold Read Mask : lcr ucr Assertion Events : Assertions Enabled : lcr- ucr+ Deassertions Enabled : lcr- ucr+ Sensor ID : Planar 12V (0x18) Entity ID : 7.1 (System Board) Sensor Type (Analog) : Voltage Sensor Reading : 11.880 (+/- 0) Volts Status : ok Nominal Reading : 12.042 Upper critical : 13.446 Lower critical : 10.692 Positive Hysteresis : 0.108 Negative Hysteresis : 0.108 Minimum sensor range : Unspecified Maximum sensor range : Unspecified Event Message Control : Per-threshold Readable Thresholds : lcr ucr Settable Thresholds : lcr ucr Threshold Read Mask : lcr ucr Assertion Events : Assertions Enabled : lcr- ucr+ Deassertions Enabled : lcr- ucr+ Sensor ID : Planar VBAT (0x1c) Entity ID : 7.1 (System Board) Sensor Type (Analog) : Voltage Sensor Reading : 3.061 (+/- 0) Volts Status : ok Nominal Reading : 3.010 Lower critical : 2.095 Lower non-critical : 2.248 Positive Hysteresis : 0.025 Negative Hysteresis : 0.025 Minimum sensor range : Unspecified Maximum sensor range : Unspecified Event Message Control : Per-threshold Readable Thresholds : lcr lnc Settable Thresholds : lcr lnc Threshold Read Mask : lcr lnc Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan 1A Tach (0x40) Entity ID : 29.1 (Fan Device) Sensor Type (Analog) : Fan Sensor Reading : 3657 (+/- 0) RPM Status : ok Nominal Reading : 8692.000 Normal Minimum : 2173.000 Normal Maximum : 13515.000 Lower critical : 530.000 Positive Hysteresis : 106.000 Negative Hysteresis : 106.000 Minimum sensor range : Unspecified Maximum sensor range : Unspecified Event Message Control : Per-threshold Readable Thresholds : lcr Settable Thresholds : Threshold Read Mask : lcr Assertion Events : Assertions Enabled : lcr- Deassertions Enabled : lcr- Sensor ID : Fan 1B Tach (0x41) Entity ID : 29.1 (Fan Device) Sensor Type (Analog) : Fan Sensor Reading : 2448 (+/- 0) RPM Status : ok Nominal Reading : 7872.000 Normal Minimum : 2688.000 Normal Maximum : 12240.000 Lower critical : 480.000 Positive Hysteresis : 96.000 Negative Hysteresis : 96.000 Minimum sensor range : Unspecified Maximum sensor range : Unspecified Event Message Control : Per-threshold Readable Thresholds : lcr Settable Thresholds : Threshold Read Mask : lcr Assertion Events : Assertions Enabled : lcr- Deassertions Enabled : lcr- Sensor ID : Fan 2A Tach (0x42) Entity ID : 29.2 (Fan Device) Sensor Type (Analog) : Fan Sensor Reading : 3710 (+/- 0) RPM Status : ok Nominal Reading : 8692.000 Normal Minimum : 2173.000 Normal Maximum : 13515.000 Lower critical : 530.000 Positive Hysteresis : 106.000 Negative Hysteresis : 106.000 Minimum sensor range : Unspecified Maximum sensor range : Unspecified Event Message Control : Per-threshold Readable Thresholds : lcr Settable Thresholds : Threshold Read Mask : lcr Assertion Events : Assertions Enabled : lcr- Deassertions Enabled : lcr- Sensor ID : Fan 2B Tach (0x43) Entity ID : 29.2 (Fan Device) Sensor Type (Analog) : Fan Sensor Reading : 2496 (+/- 0) RPM Status : ok Nominal Reading : 7872.000 Normal Minimum : 2688.000 Normal Maximum : 12240.000 Lower critical : 480.000 Positive Hysteresis : 96.000 Negative Hysteresis : 96.000 Minimum sensor range : Unspecified Maximum sensor range : Unspecified Event Message Control : Per-threshold Readable Thresholds : lcr Settable Thresholds : Threshold Read Mask : lcr Assertion Events : Assertions Enabled : lcr- Deassertions Enabled : lcr- Sensor ID : Fan 3A Tach (0x44) Entity ID : 29.3 (Fan Device) Sensor Type (Analog) : Fan Sensor Reading : 4081 (+/- 0) RPM Status : ok Nominal Reading : 8692.000 Normal Minimum : 2173.000 Normal Maximum : 13515.000 Lower critical : 530.000 Positive Hysteresis : 106.000 Negative Hysteresis : 106.000 Minimum sensor range : Unspecified Maximum sensor range : Unspecified Event Message Control : Per-threshold Readable Thresholds : lcr Settable Thresholds : Threshold Read Mask : lcr Assertion Events : Assertions Enabled : lcr- Deassertions Enabled : lcr- Sensor ID : Fan 3B Tach (0x45) Entity ID : 29.3 (Fan Device) Sensor Type (Analog) : Fan Sensor Reading : 2832 (+/- 0) RPM Status : ok Nominal Reading : 7872.000 Normal Minimum : 2688.000 Normal Maximum : 12240.000 Lower critical : 480.000 Positive Hysteresis : 96.000 Negative Hysteresis : 96.000 Minimum sensor range : Unspecified Maximum sensor range : Unspecified Event Message Control : Per-threshold Readable Thresholds : lcr Settable Thresholds : Threshold Read Mask : lcr Assertion Events : Assertions Enabled : lcr- Deassertions Enabled : lcr- Sensor ID : Fan 4A Tach (0x46) Entity ID : 29.4 (Fan Device) Sensor Type (Analog) : Fan Sensor Reading : 4028 (+/- 0) RPM Status : ok Nominal Reading : 8692.000 Normal Minimum : 2173.000 Normal Maximum : 13515.000 Lower critical : 530.000 Positive Hysteresis : 106.000 Negative Hysteresis : 106.000 Minimum sensor range : Unspecified Maximum sensor range : Unspecified Event Message Control : Per-threshold Readable Thresholds : lcr Settable Thresholds : Threshold Read Mask : lcr Assertion Events : Assertions Enabled : lcr- Deassertions Enabled : lcr- Sensor ID : Fan 4B Tach (0x47) Entity ID : 29.4 (Fan Device) Sensor Type (Analog) : Fan Sensor Reading : 2880 (+/- 0) RPM Status : ok Nominal Reading : 7872.000 Normal Minimum : 2688.000 Normal Maximum : 12240.000 Lower critical : 480.000 Positive Hysteresis : 96.000 Negative Hysteresis : 96.000 Minimum sensor range : Unspecified Maximum sensor range : Unspecified Event Message Control : Per-threshold Readable Thresholds : lcr Settable Thresholds : Threshold Read Mask : lcr Assertion Events : Assertions Enabled : lcr- Deassertions Enabled : lcr- Sensor ID : Fan 5A Tach (0x48) Entity ID : 29.5 (Fan Device) Sensor Type (Analog) : Fan Sensor Reading : 4028 (+/- 0) RPM Status : ok Nominal Reading : 8692.000 Normal Minimum : 2173.000 Normal Maximum : 13515.000 Lower critical : 530.000 Positive Hysteresis : 106.000 Negative Hysteresis : 106.000 Minimum sensor range : Unspecified Maximum sensor range : Unspecified Event Message Control : Per-threshold Readable Thresholds : lcr Settable Thresholds : Threshold Read Mask : lcr Assertion Events : Assertions Enabled : lcr- Deassertions Enabled : lcr- Sensor ID : Fan 5B Tach (0x49) Entity ID : 29.5 (Fan Device) Sensor Type (Analog) : Fan Sensor Reading : 2928 (+/- 0) RPM Status : ok Nominal Reading : 7872.000 Normal Minimum : 2688.000 Normal Maximum : 12240.000 Lower critical : 480.000 Positive Hysteresis : 96.000 Negative Hysteresis : 96.000 Minimum sensor range : Unspecified Maximum sensor range : Unspecified Event Message Control : Per-threshold Readable Thresholds : lcr Settable Thresholds : Threshold Read Mask : lcr Assertion Events : Assertions Enabled : lcr- Deassertions Enabled : lcr- Sensor ID : Fan 6A Tach (0x4a) Entity ID : 29.6 (Fan Device) Sensor Type (Analog) : Fan Sensor Reading : 4187 (+/- 0) RPM Status : ok Nominal Reading : 8692.000 Normal Minimum : 2173.000 Normal Maximum : 13515.000 Lower critical : 530.000 Positive Hysteresis : 106.000 Negative Hysteresis : 106.000 Minimum sensor range : Unspecified Maximum sensor range : Unspecified Event Message Control : Per-threshold Readable Thresholds : lcr Settable Thresholds : Threshold Read Mask : lcr Assertion Events : Assertions Enabled : lcr- Deassertions Enabled : lcr- Sensor ID : Fan 6B Tach (0x4b) Entity ID : 29.6 (Fan Device) Sensor Type (Analog) : Fan Sensor Reading : 2880 (+/- 0) RPM Status : ok Nominal Reading : 7872.000 Normal Minimum : 2688.000 Normal Maximum : 12240.000 Lower critical : 480.000 Positive Hysteresis : 96.000 Negative Hysteresis : 96.000 Minimum sensor range : Unspecified Maximum sensor range : Unspecified Event Message Control : Per-threshold Readable Thresholds : lcr Settable Thresholds : Threshold Read Mask : lcr Assertion Events : Assertions Enabled : lcr- Deassertions Enabled : lcr- Sensor ID : Fan 1 (0x50) Entity ID : 29.1 (Fan Device) Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Assertion Events : Entity Presence [Present] Assertions Enabled : Entity Presence [Absent] Deassertions Enabled : Entity Presence [Absent] Sensor ID : Fan 2 (0x51) Entity ID : 29.2 (Fan Device) Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Assertion Events : Entity Presence [Present] Assertions Enabled : Entity Presence [Absent] Deassertions Enabled : Entity Presence [Absent] Sensor ID : Fan 3 (0x52) Entity ID : 29.3 (Fan Device) Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Assertion Events : Entity Presence [Present] Assertions Enabled : Entity Presence [Absent] Deassertions Enabled : Entity Presence [Absent] Sensor ID : Fan 4 (0x53) Entity ID : 29.4 (Fan Device) Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Assertion Events : Entity Presence [Present] Assertions Enabled : Entity Presence [Absent] Deassertions Enabled : Entity Presence [Absent] Sensor ID : Fan 5 (0x54) Entity ID : 29.5 (Fan Device) Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Assertion Events : Entity Presence [Present] Assertions Enabled : Entity Presence [Absent] Deassertions Enabled : Entity Presence [Absent] Sensor ID : Fan 6 (0x55) Entity ID : 29.6 (Fan Device) Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Assertion Events : Entity Presence [Present] Assertions Enabled : Entity Presence [Absent] Deassertions Enabled : Entity Presence [Absent] Sensor ID : Front Panel (0x83) Entity ID : 12.1 (Front Panel Board) Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Assertion Events : Entity Presence [Present] Assertions Enabled : Entity Presence [Absent] Deassertions Enabled : Entity Presence [Absent] Sensor ID : Video USB (0x84) Entity ID : 7.1 (System Board) Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable/Interconnect [Connected] Assertion Events : Cable/Interconnect [Connected] Assertions Enabled : Cable/Interconnect [Config Error] Deassertions Enabled : Cable/Interconnect [Config Error] Sensor ID : DASD Backplane (0x85) Entity ID : 15.1 (Drive Backplane) Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Assertion Events : Entity Presence [Present] Sensor ID : SAS Riser (0x88) Entity ID : 11.1 (Add-in Card) Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Assertion Events : Entity Presence [Present] Assertions Enabled : Entity Presence [Absent] Deassertions Enabled : Entity Presence [Absent] Sensor ID : PCI Riser 1 (0x89) Entity ID : 11.2 (Add-in Card) Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Assertion Events : Entity Presence [Present] Assertions Enabled : Entity Presence [Absent] Deassertions Enabled : Entity Presence [Absent] Sensor ID : PCI Riser 2 (0x8a) Entity ID : 11.3 (Add-in Card) Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Assertion Events : Entity Presence [Present] Assertions Enabled : Entity Presence [Absent] Deassertions Enabled : Entity Presence [Absent] Sensor ID : CPU 1 (0x90) Entity ID : 3.1 (Processor) Sensor Type (Discrete): Processor States Asserted : Processor [Presence detected] Assertion Events : Processor [Presence detected] Assertions Enabled : Processor [IERR] [Thermal Trip] [FRB1/BIST failure] [Configuration Error] [SM BIOS Uncorrectable CPU-complex Error] [Disabled] [Throttled] Deassertions Enabled : Processor [IERR] [Thermal Trip] [FRB1/BIST failure] [Configuration Error] [SM BIOS Uncorrectable CPU-complex Error] [Disabled] [Throttled] Sensor ID : CPU 2 (0x91) Entity ID : 3.2 (Processor) Sensor Type (Discrete): Processor States Asserted : Processor [Presence detected] Assertion Events : Processor [Presence detected] Assertions Enabled : Processor [IERR] [Thermal Trip] [FRB1/BIST failure] [Configuration Error] [SM BIOS Uncorrectable CPU-complex Error] [Disabled] [Throttled] Deassertions Enabled : Processor [IERR] [Thermal Trip] [FRB1/BIST failure] [Configuration Error] [SM BIOS Uncorrectable CPU-complex Error] [Disabled] [Throttled] Sensor ID : All CPUs (0x93) Entity ID : 37.4 (Group) Sensor Type (Discrete): Processor Assertions Enabled : Processor [Disabled] Deassertions Enabled : Processor [Disabled] Sensor ID : One of the CPUs (0x94) Entity ID : 37.4 (Group) Sensor Type (Discrete): Processor Assertions Enabled : Processor [Disabled] Deassertions Enabled : Processor [Disabled] Sensor ID : IOH Temp Status (0x31) Entity ID : 45.1 (Processor/IO Module) Sensor Type (Discrete): Temperature States Asserted : Severity State [Transition to OK] Assertion Events : Severity State [Transition to OK] Assertions Enabled : Severity State [Transition to Critical from less severe] [Transition to Non-recoverable from less severe] Deassertions Enabled : Severity State [Transition to Critical from less severe] [Transition to Non-recoverable from less severe] Sensor ID : CPU 1 OverTemp (0xc0) Entity ID : 3.1 (Processor) Sensor Type (Discrete): Temperature States Asserted : Severity State [Transition to OK] Assertion Events : Severity State [Transition to OK] Assertions Enabled : Severity State [Transition to Critical from less severe] [Transition to Non-recoverable from less severe] Deassertions Enabled : Severity State [Transition to Critical from less severe] [Transition to Non-recoverable from less severe] Sensor ID : CPU 2 OverTemp (0xc1) Entity ID : 3.2 (Processor) Sensor Type (Discrete): Temperature States Asserted : Severity State [Transition to OK] Assertion Events : Severity State [Transition to OK] Assertions Enabled : Severity State [Transition to Critical from less severe] [Transition to Non-recoverable from less severe] Deassertions Enabled : Severity State [Transition to Critical from less severe] [Transition to Non-recoverable from less severe] Sensor ID : CPU Fault Reboot (0xcb) Entity ID : 37.4 (Group) Sensor Type (Discrete): System Event Assertions Enabled : System Event [Undetermined system hardware failure] Deassertions Enabled : System Event [Undetermined system hardware failure] Sensor ID : Aux Log (0xcc) Entity ID : 34.1 (BIOS) Sensor Type (Discrete): System Event Assertions Enabled : System Event [Entry added to auxiliary log] Sensor ID : NMI State (0x80) Entity ID : 23.1 (System Chassis) Sensor Type (Discrete): Critical Interrupt Assertions Enabled : Critical Interrupt [NMI/Diag Interrupt] [Software NMI] Deassertions Enabled : Critical Interrupt [NMI/Diag Interrupt] [Software NMI] Sensor ID : ABR Status (0x92) Entity ID : 34.1 (BIOS) Sensor Type (Discrete): System Firmwares Assertions Enabled : System Firmware Error [Unspecified] [No system memory installed] [No usable system memory] [Unrecoverable IDE device failure] [Unrecoverable system-board failure] [Unrecoverable diskette failure] [Unrecoverable hard-disk controller failure] [Unrecoverable PS/2 or USB keyboard failure] [Removable boot media not found] [Unrecoverable video controller failure] [No video device selected] [BIOS corruption detected] [CPU voltage mismatch] [CPU speed mismatch failure] [Unknown Error] Deassertions Enabled : System Firmware Error [Unspecified] [No system memory installed] [No usable system memory] [Unrecoverable IDE device failure] [Unrecoverable system-board failure] [Unrecoverable diskette failure] [Unrecoverable hard-disk controller failure] [Unrecoverable PS/2 or USB keyboard failure] [Removable boot media not found] [Unrecoverable video controller failure] [No video device selected] [BIOS corruption detected] [CPU voltage mismatch] [CPU speed mismatch failure] [Unknown Error] Sensor ID : Progress (0xb5) Entity ID : 34.1 (BIOS) Sensor Type (Discrete): System Firmwares Assertions Enabled : System Firmware Error [Unspecified] [Memory initialization] [Hard-disk initialization] [Secondary CPU Initialization] [User authentication] [User-initiated system setup] [USB resource configuration] [PCI resource configuration] [Option ROM initialization] [Video initialization] [Cache initialization] [SMBus initialization] [Keyboard controller initialization] [Management controller initialization] [Docking station attachment] [Enabling docking station] [Docking station ejection] [Disabling docking station] [Calling operating system wake-up vector] [System boot initiated] [Motherboard initialization] [reserved] [Floppy initialization] [Keyboard test] [Pointing device test] [Primary CPU initialization] [Unknown Progress] Sensor ID : Firmware Error (0xb4) Entity ID : 34.1 (BIOS) Sensor Type (Discrete): System Firmwares Assertions Enabled : System Firmware Error [Unspecified] [No system memory installed] [No usable system memory] [Unrecoverable IDE device failure] [Unrecoverable system-board failure] [Unrecoverable diskette failure] [Unrecoverable hard-disk controller failure] [Unrecoverable PS/2 or USB keyboard failure] [Removable boot media not found] [Unrecoverable video controller failure] [No video device selected] [BIOS corruption detected] [CPU voltage mismatch] [CPU speed mismatch failure] [Unknown Error] [Unspecified] [Memory initialization] [Hard-disk initialization] [Secondary CPU Initialization] [User authentication] [User-initiated system setup] [USB resource configuration] [PCI resource configuration] [Option ROM initialization] [Video initialization] [Cache initialization] [SMBus initialization] [Keyboard controller initialization] [Management controller initialization] [Docking station attachment] [Enabling docking station] [Docking station ejection] [Disabling docking station] [Calling operating system wake-up vector] [System boot initiated] [Motherboard initialization] [reserved] [Floppy initialization] [Keyboard test] [Pointing device test] [Primary CPU initialization] [Unknown Hang] Deassertions Enabled : System Firmware Error [Unspecified] [No system memory installed] [No usable system memory] [Unrecoverable IDE device failure] [Unrecoverable system-board failure] [Unrecoverable diskette failure] [Unrecoverable hard-disk controller failure] [Unrecoverable PS/2 or USB keyboard failure] [Removable boot media not found] [Unrecoverable video controller failure] [No video device selected] [BIOS corruption detected] [CPU voltage mismatch] [CPU speed mismatch failure] [Unknown Error] [Unspecified] [Memory initialization] [Hard-disk initialization] [Secondary CPU Initialization] [User authentication] [User-initiated system setup] [USB resource configuration] [PCI resource configuration] [Option ROM initialization] [Video initialization] [Cache initialization] [SMBus initialization] [Keyboard controller initialization] [Management controller initialization] [Docking station attachment] [Enabling docking station] [Docking station ejection] [Disabling docking station] [Calling operating system wake-up vector] [System boot initiated] [Motherboard initialization] [reserved] [Floppy initialization] [Keyboard test] [Pointing device test] [Primary CPU initialization] [Unknown Hang] Sensor ID : PCIs (0xb0) Entity ID : 37.2 (Group) Sensor Type (Discrete): Critical Interrupt Assertions Enabled : Critical Interrupt [PCI PERR] [PCI SERR] [Bus Uncorrectable error] Deassertions Enabled : Critical Interrupt [PCI PERR] [PCI SERR] [Bus Uncorrectable error] Sensor ID : CPUs (0xb1) Entity ID : 37.4 (Group) Sensor Type (Discrete): Critical Interrupt Assertions Enabled : Critical Interrupt [Bus Uncorrectable error] Deassertions Enabled : Critical Interrupt [Bus Uncorrectable error] Sensor ID : DIMMs (0xb2) Entity ID : 37.1 (Group) Sensor Type (Discrete): Critical Interrupt Assertions Enabled : Critical Interrupt [Bus Uncorrectable error] Deassertions Enabled : Critical Interrupt [Bus Uncorrectable error] Sensor ID : Sys Board Fault (0xb3) Entity ID : 7.1 (System Board) Sensor Type (Discrete): Chip Set Assertions Enabled : Severity State [Transition to Critical from less severe] Deassertions Enabled : Severity State [Transition to Critical from less severe] Sensor ID : Power Supply 1 (0x70) Entity ID : 10.1 (Power Supply) Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Assertion Events : Power Supply [Presence detected] Assertions Enabled : Power Supply [Presence detected] [Failure detected] [Power Supply AC lost] Deassertions Enabled : Power Supply [Presence detected] [Failure detected] [Power Supply AC lost] Sensor ID : Power Supply 2 (0x71) Entity ID : 10.2 (Power Supply) Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Assertion Events : Power Supply [Presence detected] Assertions Enabled : Power Supply [Presence detected] [Failure detected] [Power Supply AC lost] Deassertions Enabled : Power Supply [Presence detected] [Failure detected] [Power Supply AC lost] Sensor ID : PS 1 Fan Fault (0x73) Entity ID : 10.1 (Power Supply) Sensor Type (Discrete): Fan States Asserted : Severity State [Transition to OK] Assertion Events : Severity State [Transition to OK] Assertions Enabled : Severity State [Transition to Critical from less severe] Deassertions Enabled : Severity State [Transition to Critical from less severe] Sensor ID : PS 2 Fan Fault (0x74) Entity ID : 10.2 (Power Supply) Sensor Type (Discrete): Fan States Asserted : Severity State [Transition to OK] Assertion Events : Severity State [Transition to OK] Assertions Enabled : Severity State [Transition to Critical from less severe] Deassertions Enabled : Severity State [Transition to Critical from less severe] Sensor ID : VT Fault (0x28) Entity ID : 7.1 (System Board) Sensor Type (Discrete): Power Supply Assertions Enabled : Severity State [Transition to Non-recoverable] Deassertions Enabled : Severity State [Transition to Non-recoverable] Sensor ID : Pwr Rail A Fault (0x29) Entity ID : 7.1 (System Board) Sensor Type (Discrete): Current States Asserted : Severity State [Transition to OK] Assertion Events : Severity State [Transition to OK] Assertions Enabled : Severity State [Transition to Non-recoverable] Deassertions Enabled : Severity State [Transition to Non-recoverable] Sensor ID : Pwr Rail B Fault (0x2a) Entity ID : 7.1 (System Board) Sensor Type (Discrete): Current States Asserted : Severity State [Transition to OK] Assertion Events : Severity State [Transition to OK] Assertions Enabled : Severity State [Transition to Non-recoverable] Deassertions Enabled : Severity State [Transition to Non-recoverable] Sensor ID : Pwr Rail C Fault (0x2b) Entity ID : 7.1 (System Board) Sensor Type (Discrete): Current States Asserted : Severity State [Transition to OK] Assertion Events : Severity State [Transition to OK] Assertions Enabled : Severity State [Transition to Non-recoverable] Deassertions Enabled : Severity State [Transition to Non-recoverable] Sensor ID : Pwr Rail D Fault (0x2c) Entity ID : 7.1 (System Board) Sensor Type (Discrete): Current States Asserted : Severity State [Transition to OK] Assertion Events : Severity State [Transition to OK] Assertions Enabled : Severity State [Transition to Non-recoverable] Deassertions Enabled : Severity State [Transition to Non-recoverable] Sensor ID : Pwr Rail E Fault (0x2d) Entity ID : 7.1 (System Board) Sensor Type (Discrete): Current States Asserted : Severity State [Transition to OK] Assertion Events : Severity State [Transition to OK] Assertions Enabled : Severity State [Transition to Non-recoverable] Deassertions Enabled : Severity State [Transition to Non-recoverable] Sensor ID : PS 1 Therm Fault (0x75) Entity ID : 10.1 (Power Supply) Sensor Type (Discrete): Power Supply States Asserted : Severity State [Transition to OK] Assertion Events : Severity State [Transition to OK] Assertions Enabled : Severity State [Transition to Critical from less severe] Deassertions Enabled : Severity State [Transition to Critical from less severe] Sensor ID : PS 2 Therm Fault (0x76) Entity ID : 10.2 (Power Supply) Sensor Type (Discrete): Power Supply States Asserted : Severity State [Transition to OK] Assertion Events : Severity State [Transition to OK] Assertions Enabled : Severity State [Transition to Critical from less severe] Deassertions Enabled : Severity State [Transition to Critical from less severe] Sensor ID : PS1 12V OV Fault (0x77) Entity ID : 10.1 (Power Supply) Sensor Type (Discrete): Power Supply States Asserted : Severity State [Transition to OK] Assertion Events : Severity State [Transition to OK] Assertions Enabled : Severity State [Transition to Non-recoverable] Deassertions Enabled : Severity State [Transition to Non-recoverable] Sensor ID : PS2 12V OV Fault (0x78) Entity ID : 10.2 (Power Supply) Sensor Type (Discrete): Power Supply States Asserted : Severity State [Transition to OK] Assertion Events : Severity State [Transition to OK] Assertions Enabled : Severity State [Transition to Non-recoverable] Deassertions Enabled : Severity State [Transition to Non-recoverable] Sensor ID : PS1 12V UV Fault (0x79) Entity ID : 10.1 (Power Supply) Sensor Type (Discrete): Power Supply States Asserted : Severity State [Transition to OK] Assertion Events : Severity State [Transition to OK] Assertions Enabled : Severity State [Transition to Non-recoverable] Deassertions Enabled : Severity State [Transition to Non-recoverable] Sensor ID : PS2 12V UV Fault (0x7a) Entity ID : 10.2 (Power Supply) Sensor Type (Discrete): Power Supply States Asserted : Severity State [Transition to OK] Assertion Events : Severity State [Transition to OK] Assertions Enabled : Severity State [Transition to Non-recoverable] Deassertions Enabled : Severity State [Transition to Non-recoverable] Sensor ID : PS1 12V OC Fault (0x7b) Entity ID : 10.1 (Power Supply) Sensor Type (Discrete): Power Supply States Asserted : Severity State [Transition to OK] Assertion Events : Severity State [Transition to OK] Assertions Enabled : Severity State [Transition to Non-recoverable] Deassertions Enabled : Severity State [Transition to Non-recoverable] Sensor ID : PS2 12V OC Fault (0x7c) Entity ID : 10.2 (Power Supply) Sensor Type (Discrete): Power Supply States Asserted : Severity State [Transition to OK] Assertion Events : Severity State [Transition to OK] Assertions Enabled : Severity State [Transition to Non-recoverable] Deassertions Enabled : Severity State [Transition to Non-recoverable] Sensor ID : PS 1 VCO Fault (0x7d) Entity ID : 10.1 (Power Supply) Sensor Type (Discrete): Power Supply States Asserted : Severity State [Transition to OK] Assertion Events : Severity State [Transition to OK] Assertions Enabled : Severity State [Transition to Non-recoverable] Deassertions Enabled : Severity State [Transition to Non-recoverable] Sensor ID : PS 2 VCO Fault (0x7e) Entity ID : 10.2 (Power Supply) Sensor Type (Discrete): Power Supply States Asserted : Severity State [Transition to OK] Assertion Events : Severity State [Transition to OK] Assertions Enabled : Severity State [Transition to Non-recoverable] Deassertions Enabled : Severity State [Transition to Non-recoverable] Sensor ID : Power Unit (0x7f) Entity ID : 19.1 (Power Unit) Sensor Type (Discrete): Power Supply States Asserted : Redundancy State [Fully Redundant] Assertion Events : Redundancy State [Fully Redundant] Assertions Enabled : Redundancy State [Fully Redundant] [Redundancy Lost] Sensor ID : Cooling Zone 1 (0x5c) Entity ID : 30.1 (Cooling Unit) Sensor Type (Discrete): Cooling Device States Asserted : Redundancy State [Fully Redundant] Assertion Events : Redundancy State [Fully Redundant] Assertions Enabled : Redundancy State [Redundancy Lost] [Non-Redundant: Insufficient Resources] Deassertions Enabled : Redundancy State [Redundancy Lost] [Non-Redundant: Insufficient Resources] Sensor ID : Cooling Zone 2 (0x5d) Entity ID : 30.2 (Cooling Unit) Sensor Type (Discrete): Cooling Device States Asserted : Redundancy State [Fully Redundant] Assertion Events : Redundancy State [Fully Redundant] Assertions Enabled : Redundancy State [Redundancy Lost] [Non-Redundant: Insufficient Resources] Deassertions Enabled : Redundancy State [Redundancy Lost] [Non-Redundant: Insufficient Resources] Sensor ID : Cooling Zone 3 (0x5e) Entity ID : 30.3 (Cooling Unit) Sensor Type (Discrete): Cooling Device States Asserted : Redundancy State [Fully Redundant] Assertion Events : Redundancy State [Fully Redundant] Assertions Enabled : Redundancy State [Redundancy Lost] [Non-Redundant: Insufficient Resources] Deassertions Enabled : Redundancy State [Redundancy Lost] [Non-Redundant: Insufficient Resources] Sensor ID : Drive 0 (0x60) Entity ID : 4.0 (Disk or Disk Bay) Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot [Drive Present] Assertion Events : Drive Slot [Drive Present] Assertions Enabled : Drive Slot [Drive Present] [Drive Fault] [Predictive Failure] [In Critical Array] [In Failed Array] [Rebuild In Progress] Deassertions Enabled : Drive Slot [Drive Present] [Drive Fault] [Predictive Failure] [In Critical Array] [In Failed Array] [Rebuild In Progress] Sensor ID : Drive 1 (0x61) Entity ID : 4.1 (Disk or Disk Bay) Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot [Drive Present] Assertion Events : Drive Slot [Drive Present] Assertions Enabled : Drive Slot [Drive Present] [Drive Fault] [Predictive Failure] [In Critical Array] [In Failed Array] [Rebuild In Progress] Deassertions Enabled : Drive Slot [Drive Present] [Drive Fault] [Predictive Failure] [In Critical Array] [In Failed Array] [Rebuild In Progress] Sensor ID : Drive 2 (0x62) Entity ID : 4.2 (Disk or Disk Bay) Sensor Type (Discrete): Drive Slot / Bay Assertions Enabled : Drive Slot [Drive Present] [Drive Fault] [Predictive Failure] [In Critical Array] [In Failed Array] [Rebuild In Progress] Deassertions Enabled : Drive Slot [Drive Present] [Drive Fault] [Predictive Failure] [In Critical Array] [In Failed Array] [Rebuild In Progress] Sensor ID : Drive 3 (0x63) Entity ID : 4.3 (Disk or Disk Bay) Sensor Type (Discrete): Drive Slot / Bay Assertions Enabled : Drive Slot [Drive Present] [Drive Fault] [Predictive Failure] [In Critical Array] [In Failed Array] [Rebuild In Progress] Deassertions Enabled : Drive Slot [Drive Present] [Drive Fault] [Predictive Failure] [In Critical Array] [In Failed Array] [Rebuild In Progress] Sensor ID : Drive 4 (0x64) Entity ID : 4.4 (Disk or Disk Bay) Sensor Type (Discrete): Drive Slot / Bay Assertions Enabled : Drive Slot [Drive Present] [Drive Fault] [Predictive Failure] [In Critical Array] [In Failed Array] [Rebuild In Progress] Deassertions Enabled : Drive Slot [Drive Present] [Drive Fault] [Predictive Failure] [In Critical Array] [In Failed Array] [Rebuild In Progress] Sensor ID : Drive 5 (0x65) Entity ID : 4.5 (Disk or Disk Bay) Sensor Type (Discrete): Drive Slot / Bay Assertions Enabled : Drive Slot [Drive Present] [Drive Fault] [Predictive Failure] [In Critical Array] [In Failed Array] [Rebuild In Progress] Deassertions Enabled : Drive Slot [Drive Present] [Drive Fault] [Predictive Failure] [In Critical Array] [In Failed Array] [Rebuild In Progress] Sensor ID : All DIMMS (0x34) Entity ID : 37.1 (Group) Sensor Type (Discrete): Memory Assertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Deassertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Sensor ID : One of the DIMMs (0x35) Entity ID : 37.1 (Group) Sensor Type (Discrete): Memory Assertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Deassertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Sensor ID : DIMM 1 (0xd0) Entity ID : 32.1 (Memory Device) Sensor Type (Discrete): Memory Assertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Deassertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Sensor ID : DIMM 2 (0xd1) Entity ID : 32.2 (Memory Device) Sensor Type (Discrete): Memory Assertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Deassertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Sensor ID : DIMM 3 (0xd2) Entity ID : 32.3 (Memory Device) Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Assertion Events : Memory [Presence Detected] Assertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Deassertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Sensor ID : DIMM 4 (0xd3) Entity ID : 32.4 (Memory Device) Sensor Type (Discrete): Memory Assertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Deassertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Sensor ID : DIMM 5 (0xd4) Entity ID : 32.5 (Memory Device) Sensor Type (Discrete): Memory Assertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Deassertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Sensor ID : DIMM 6 (0xd5) Entity ID : 32.6 (Memory Device) Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Assertion Events : Memory [Presence Detected] Assertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Deassertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Sensor ID : DIMM 7 (0xd6) Entity ID : 32.7 (Memory Device) Sensor Type (Discrete): Memory Assertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Deassertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Sensor ID : DIMM 8 (0xd7) Entity ID : 32.8 (Memory Device) Sensor Type (Discrete): Memory Assertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Deassertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Sensor ID : DIMM 9 (0xd8) Entity ID : 32.9 (Memory Device) Sensor Type (Discrete): Memory Assertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Deassertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Sensor ID : DIMM 10 (0xd9) Entity ID : 32.10 (Memory Device) Sensor Type (Discrete): Memory Assertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Deassertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Sensor ID : DIMM 11 (0xda) Entity ID : 32.11 (Memory Device) Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Assertion Events : Memory [Presence Detected] Assertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Deassertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Sensor ID : DIMM 12 (0xdb) Entity ID : 32.12 (Memory Device) Sensor Type (Discrete): Memory Assertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Deassertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Sensor ID : DIMM 13 (0xdc) Entity ID : 32.13 (Memory Device) Sensor Type (Discrete): Memory Assertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Deassertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Sensor ID : DIMM 14 (0xdd) Entity ID : 32.14 (Memory Device) Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Assertion Events : Memory [Presence Detected] Assertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Deassertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Sensor ID : DIMM 15 (0xde) Entity ID : 32.15 (Memory Device) Sensor Type (Discrete): Memory Assertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Deassertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Sensor ID : DIMM 16 (0xdf) Entity ID : 32.16 (Memory Device) Sensor Type (Discrete): Memory Assertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Deassertions Enabled : Memory [Uncorrectable ECC] [Memory Device Disabled] [Correctable ECC logging limit reached] [Configuration Error] Sensor ID : DIMM 1 Temp (0xe0) Entity ID : 32.1 (Memory Device) Sensor Type (Discrete): Temperature Assertions Enabled : Severity State [Transition to Critical from less severe] Deassertions Enabled : Severity State [Transition to Critical from less severe] Sensor ID : DIMM 2 Temp (0xe1) Entity ID : 32.2 (Memory Device) Sensor Type (Discrete): Temperature Assertions Enabled : Severity State [Transition to Critical from less severe] Deassertions Enabled : Severity State [Transition to Critical from less severe] Sensor ID : DIMM 3 Temp (0xe2) Entity ID : 32.3 (Memory Device) Sensor Type (Discrete): Temperature States Asserted : Severity State [Transition to OK] Assertion Events : Severity State [Transition to OK] Assertions Enabled : Severity State [Transition to Critical from less severe] Deassertions Enabled : Severity State [Transition to Critical from less severe] Sensor ID : DIMM 4 Temp (0xe3) Entity ID : 32.4 (Memory Device) Sensor Type (Discrete): Temperature Assertions Enabled : Severity State [Transition to Critical from less severe] Deassertions Enabled : Severity State [Transition to Critical from less severe] Sensor ID : DIMM 5 Temp (0xe4) Entity ID : 32.5 (Memory Device) Sensor Type (Discrete): Temperature Assertions Enabled : Severity State [Transition to Critical from less severe] Deassertions Enabled : Severity State [Transition to Critical from less severe] Sensor ID : DIMM 6 Temp (0xe5) Entity ID : 32.6 (Memory Device) Sensor Type (Discrete): Temperature States Asserted : Severity State [Transition to OK] Assertion Events : Severity State [Transition to OK] Assertions Enabled : Severity State [Transition to Critical from less severe] Deassertions Enabled : Severity State [Transition to Critical from less severe] Sensor ID : DIMM 7 Temp (0xe6) Entity ID : 32.7 (Memory Device) Sensor Type (Discrete): Temperature Assertions Enabled : Severity State [Transition to Critical from less severe] Deassertions Enabled : Severity State [Transition to Critical from less severe] Sensor ID : DIMM 8 Temp (0xe7) Entity ID : 32.8 (Memory Device) Sensor Type (Discrete): Temperature Assertions Enabled : Severity State [Transition to Critical from less severe] Deassertions Enabled : Severity State [Transition to Critical from less severe] Sensor ID : DIMM 9 Temp (0xe8) Entity ID : 32.9 (Memory Device) Sensor Type (Discrete): Temperature Assertions Enabled : Severity State [Transition to Critical from less severe] Deassertions Enabled : Severity State [Transition to Critical from less severe] Sensor ID : DIMM 10 Temp (0xe9) Entity ID : 32.10 (Memory Device) Sensor Type (Discrete): Temperature Assertions Enabled : Severity State [Transition to Critical from less severe] Deassertions Enabled : Severity State [Transition to Critical from less severe] Sensor ID : DIMM 11 Temp (0xea) Entity ID : 32.11 (Memory Device) Sensor Type (Discrete): Temperature States Asserted : Severity State [Transition to OK] Assertion Events : Severity State [Transition to OK] Assertions Enabled : Severity State [Transition to Critical from less severe] Deassertions Enabled : Severity State [Transition to Critical from less severe] Sensor ID : DIMM 12 Temp (0xeb) Entity ID : 32.12 (Memory Device) Sensor Type (Discrete): Temperature Assertions Enabled : Severity State [Transition to Critical from less severe] Deassertions Enabled : Severity State [Transition to Critical from less severe] Sensor ID : DIMM 13 Temp (0xec) Entity ID : 32.13 (Memory Device) Sensor Type (Discrete): Temperature Assertions Enabled : Severity State [Transition to Critical from less severe] Deassertions Enabled : Severity State [Transition to Critical from less severe] Sensor ID : DIMM 14 Temp (0xed) Entity ID : 32.14 (Memory Device) Sensor Type (Discrete): Temperature States Asserted : Severity State [Transition to OK] Assertion Events : Severity State [Transition to OK] Assertions Enabled : Severity State [Transition to Critical from less severe] Deassertions Enabled : Severity State [Transition to Critical from less severe] Sensor ID : DIMM 15 Temp (0xee) Entity ID : 32.15 (Memory Device) Sensor Type (Discrete): Temperature Assertions Enabled : Severity State [Transition to Critical from less severe] Deassertions Enabled : Severity State [Transition to Critical from less severe] Sensor ID : DIMM 16 Temp (0xef) Entity ID : 32.16 (Memory Device) Sensor Type (Discrete): Temperature Assertions Enabled : Severity State [Transition to Critical from less severe] Deassertions Enabled : Severity State [Transition to Critical from less severe] Sensor ID : All PCI Error (0xc3) Entity ID : 37.2 (Group) Sensor Type (Discrete): Slot / Connector Assertions Enabled : Slot/Connector [Fault Status] Deassertions Enabled : Slot/Connector [Fault Status] Sensor ID : One of PCI Error (0xc9) Entity ID : 37.2 (Group) Sensor Type (Discrete): Slot / Connector Assertions Enabled : Slot/Connector [Fault Status] Deassertions Enabled : Slot/Connector [Fault Status] Sensor ID : PCI 1 (0xc4) Entity ID : 48.1 (PCI Bus) Sensor Type (Discrete): Slot / Connector Assertions Enabled : Slot/Connector [Fault Status] Deassertions Enabled : Slot/Connector [Fault Status] Sensor ID : Watchdog (0x3) Entity ID : 33.1 (System Management Software) Sensor Type (Discrete): Watchdog Assertions Enabled : Watchdog 2 [Timer expired] [Hard reset] [Power down] [Power cycle] [Timer interrupt] Sensor ID : Host Power (0x1) Entity ID : 19.1 (Power Unit) Sensor Type (Discrete): Power Unit Assertions Enabled : Power Unit [Power off/down] [Power cycle] Deassertions Enabled : Power Unit [Power off/down] Device ID : Power Supply 1 Entity ID : 10.1 (Power Supply) Device Access Address : 20h Logical FRU Device : 01h Channel Number : 0h LUN.Bus : 0h.0h Device Type.Modifier : 10h.0h (IPMI FRU Inventory) OEM : 80h Device ID : Power Supply 2 Entity ID : 10.2 (Power Supply) Device Access Address : 20h Logical FRU Device : 02h Channel Number : 0h LUN.Bus : 0h.0h Device Type.Modifier : 10h.0h (IPMI FRU Inventory) OEM : 80h Device ID : DASD Backplane Entity ID : 15.1 (Drive Backplane) Device Access Address : 20h Logical FRU Device : 03h Channel Number : 0h LUN.Bus : 0h.0h Device Type.Modifier : 10h.0h (IPMI FRU Inventory) OEM : 80h Device ID : Basebrd Mgt Ctlr Entity ID : 46.1 (Management Controller Firmware) Device Slave Address : 20h Channel Number : 0h ACPI System P/S Notif : Not Required ACPI Device P/S Notif : Not Required Controller Presence : Dynamic Logs Init Agent Errors : Yes Event Message Gen : Enable Device Capabilities Chassis Device : Yes Bridge : No IPMB Event Generator : Yes IPMB Event Receiver : Yes FRU Inventory Device : Yes SEL Device : Yes SDR Repository : Yes Sensor Device : Yes Sensor ID : Backup Memory (0x36) Entity ID : 37.1 (Group) Sensor Type (Discrete): Memory Assertions Enabled : Redundancy State [Redundancy Lost] [Non-Redundant: Sufficient from Redundant] [Non-Redundant: Insufficient Resources] Deassertions Enabled : Redundancy State [Redundancy Lost] [Non-Redundant: Sufficient from Redundant] [Non-Redundant: Insufficient Resources] Device ID : DIMM 1 Entity ID : 32.1 (Memory Device) Device Access Address : 20h Logical FRU Device : 10h Channel Number : 0h LUN.Bus : 0h.0h Device Type.Modifier : 10h.1h (DIMM Memory ID) OEM : 00h Device ID : DIMM 2 Entity ID : 32.2 (Memory Device) Device Access Address : 20h Logical FRU Device : 11h Channel Number : 0h LUN.Bus : 0h.0h Device Type.Modifier : 10h.1h (DIMM Memory ID) OEM : 00h Device ID : DIMM 3 Entity ID : 32.3 (Memory Device) Device Access Address : 20h Logical FRU Device : 12h Channel Number : 0h LUN.Bus : 0h.0h Device Type.Modifier : 10h.1h (DIMM Memory ID) OEM : 00h Device ID : DIMM 4 Entity ID : 32.4 (Memory Device) Device Access Address : 20h Logical FRU Device : 13h Channel Number : 0h LUN.Bus : 0h.0h Device Type.Modifier : 10h.1h (DIMM Memory ID) OEM : 00h Device ID : DIMM 5 Entity ID : 32.5 (Memory Device) Device Access Address : 20h Logical FRU Device : 14h Channel Number : 0h LUN.Bus : 0h.0h Device Type.Modifier : 10h.1h (DIMM Memory ID) OEM : 00h Device ID : DIMM 6 Entity ID : 32.6 (Memory Device) Device Access Address : 20h Logical FRU Device : 15h Channel Number : 0h LUN.Bus : 0h.0h Device Type.Modifier : 10h.1h (DIMM Memory ID) OEM : 00h Device ID : DIMM 7 Entity ID : 32.7 (Memory Device) Device Access Address : 20h Logical FRU Device : 16h Channel Number : 0h LUN.Bus : 0h.0h Device Type.Modifier : 10h.1h (DIMM Memory ID) OEM : 00h Device ID : DIMM 8 Entity ID : 32.8 (Memory Device) Device Access Address : 20h Logical FRU Device : 17h Channel Number : 0h LUN.Bus : 0h.0h Device Type.Modifier : 10h.1h (DIMM Memory ID) OEM : 00h Device ID : DIMM 9 Entity ID : 32.9 (Memory Device) Device Access Address : 20h Logical FRU Device : 18h Channel Number : 0h LUN.Bus : 0h.0h Device Type.Modifier : 10h.1h (DIMM Memory ID) OEM : 00h Device ID : DIMM 10 Entity ID : 32.10 (Memory Device) Device Access Address : 20h Logical FRU Device : 19h Channel Number : 0h LUN.Bus : 0h.0h Device Type.Modifier : 10h.1h (DIMM Memory ID) OEM : 00h Device ID : DIMM 11 Entity ID : 32.11 (Memory Device) Device Access Address : 20h Logical FRU Device : 1Ah Channel Number : 0h LUN.Bus : 0h.0h Device Type.Modifier : 10h.1h (DIMM Memory ID) OEM : 00h Device ID : DIMM 12 Entity ID : 32.12 (Memory Device) Device Access Address : 20h Logical FRU Device : 1Bh Channel Number : 0h LUN.Bus : 0h.0h Device Type.Modifier : 10h.1h (DIMM Memory ID) OEM : 00h Device ID : DIMM 13 Entity ID : 32.13 (Memory Device) Device Access Address : 20h Logical FRU Device : 1Ch Channel Number : 0h LUN.Bus : 0h.0h Device Type.Modifier : 10h.1h (DIMM Memory ID) OEM : 00h Device ID : DIMM 14 Entity ID : 32.14 (Memory Device) Device Access Address : 20h Logical FRU Device : 1Dh Channel Number : 0h LUN.Bus : 0h.0h Device Type.Modifier : 10h.1h (DIMM Memory ID) OEM : 00h Device ID : DIMM 15 Entity ID : 32.15 (Memory Device) Device Access Address : 20h Logical FRU Device : 1Eh Channel Number : 0h LUN.Bus : 0h.0h Device Type.Modifier : 10h.1h (DIMM Memory ID) OEM : 00h Device ID : DIMM 16 Entity ID : 32.16 (Memory Device) Device Access Address : 20h Logical FRU Device : 1Fh Channel Number : 0h LUN.Bus : 0h.0h Device Type.Modifier : 10h.1h (DIMM Memory ID) OEM : 00h Sensor ID : Planar Fault (0xf0) Entity ID : 7.1 (System Board) Sensor Type (Discrete): Voltage States Asserted : Severity State [Transition to OK] Assertion Events : Severity State [Transition to OK] Assertions Enabled : Severity State [Transition to Critical from less severe] Deassertions Enabled : Severity State [Transition to Critical from less severe] Sensor ID : SEL Fullness (0xb6) Entity ID : 33.1 (System Management Software) Sensor Type (Discrete): Event Logging Disabled Assertions Enabled : Event Logging Disabled [Log area reset/cleared] [Log full] [Log almost full] Sensor ID : PCI 5 (0xc8) Entity ID : 48.1 (PCI Bus) Sensor Type (Discrete): Slot / Connector Assertions Enabled : Slot/Connector [Fault Status] Deassertions Enabled : Slot/Connector [Fault Status] Sensor ID : OS RealTime Mod (0x39) Entity ID : 35.1 (Operating System) Sensor Type (Discrete): System Event Assertions Enabled : Digital State [State Deasserted] Deassertions Enabled : Digital State [State Deasserted] Sensor ID : PCI 2 (0xc5) Entity ID : 48.1 (PCI Bus) Sensor Type (Discrete): Slot / Connector Assertions Enabled : Slot/Connector [Fault Status] Deassertions Enabled : Slot/Connector [Fault Status]