# This is a configuration file for Zabbix Proxy process # To get more information about Zabbix, # visit http://www.zabbix.com ############ GENERAL PARAMETERS ################# ### Option: ProxyMode # Proxy operating mode # 0 - proxy in the active mode # 1 - proxy in the passive mode # # Mandatory: no # Default: ProxyMode=0 ### Option: Server # IP address (or hostname) of Zabbix server. # Active proxy will get configuration data from the server. # For a proxy in the passive mode this parameter will be ignored. # # Mandatory: yes (if ProxyMode is set to 0) # Default: # Server= Server=lx-all-mon-zserver-01 ### Option: ServerPort # Port of Zabbix trapper on Zabbix server. # For a proxy in the passive mode this parameter will be ignored. # # Mandatory: no # Range: 1024-32767 # Default: # ServerPort=10051 ServerPort=10051 ### Option: Hostname # Unique, case sensitive Proxy name. Make sure the Proxy name is known to the server! # Value is acquired from HostnameItem if undefined. # # Mandatory: no # Default: # Hostname= Hostname=lx-bra-mon-zproxy-01-zabbix-proxy ### Option: HostnameItem # Item used for generating Hostname if it is undefined. # Ignored if Hostname is defined. # # Mandatory: no # Default: #HostnameItem=system.hostname ### Option: ListenPort # Listen port for trapper. # # Mandatory: no # Range: 1024-32767 # Default: # ListenPort=10051 ListenPort=10051 ### Option: SourceIP # Source IP address for outgoing connections. # # Mandatory: no # Default: # SourceIP= ### Option: LogFile # Name of log file. # If not set, syslog is used. # # Mandatory: no # Default: # LogFile= LogFile=/var/log/zabbix/zabbix_proxy.log ### Option: LogFileSize # Maximum size of log file in MB. # 0 - disable automatic log rotation. # # Mandatory: no # Range: 0-1024 # Default: # LogFileSize=1 LogFileSize=0 ### Option: DebugLevel # Specifies debug level # 0 - no debug # 1 - critical information # 2 - error information # 3 - warnings # 4 - for debugging (produces lots of information) # # Mandatory: no # Range: 0-4 # Default: # DebugLevel=3 ### Option: PidFile # Name of PID file. # # Mandatory: no # Default: # PidFile=/tmp/zabbix_proxy.pid PidFile=/var/run/zabbix/zabbix_proxy.pid ### Option: DBHost # Database host name. # If set to localhost, socket is used for MySQL. # If set to empty string, socket is used for PostgreSQL. # # Mandatory: no # Default: # DBHost=localhost ### Option: DBName # Database name. # For SQLite3 path to database file must be provided. DBUser and DBPassword are ignored. # Warning: do not attempt to use the same database Zabbix server is using. # # Mandatory: yes # Default: # DBName= DBName=/data/zabbix/zabbix_proxy.db ### Option: DBSchema # Schema name. Used for IBM DB2. # # Mandatory: no # Default: # DBSchema= ### Option: DBUser # Database user. Ignored for SQLite. # # Default: # DBUser= DBUser=XXXXXXXX ### Option: DBPassword # Database password. Ignored for SQLite. # Comment this line if no password is used. # # Mandatory: no # Default: # DBPassword= ### Option: DBSocket # Path to MySQL socket. # # Mandatory: no # Default: # DBSocket=/tmp/mysql.sock DBSocket=/var/lib/mysql/mysql.sock # Option: DBPort # Database port when not using local socket. Ignored for SQLite. # # Mandatory: no # Default (for MySQL): # DBPort=3306 ######### PROXY SPECIFIC PARAMETERS ############# ### Option: ProxyLocalBuffer # Proxy will keep data locally for N hours, even if the data have already been synced with the server. # This parameter may be used if local data will be used by third party applications. # # Mandatory: no # Range: 0-720 # Default: # ProxyLocalBuffer=0 ProxyLocalBuffer=1 ### Option: ProxyOfflineBuffer # Proxy will keep data for N hours in case if no connectivity with Zabbix Server. # Older data will be lost. # # Mandatory: no # Range: 1-720 # Default: ProxyOfflineBuffer=12 ### Option: HeartbeatFrequency # Frequency of heartbeat messages in seconds. # Used for monitoring availability of Proxy on server side. # 0 - heartbeat messages disabled. # For a proxy in the passive mode this parameter will be ignored. # # Mandatory: no # Range: 0-3600 # Default: # HeartbeatFrequency=60 HeartbeatFrequency=15 ### Option: ConfigFrequency # How often proxy retrieves configuration data from Zabbix Server in seconds. # For a proxy in the passive mode this parameter will be ignored. # # Mandatory: no # Range: 1-3600*24*7 # Default: # ConfigFrequency=3600 ConfigFrequency=240 ### Option: DataSenderFrequency # Proxy will send collected data to the Server every N seconds. # For a proxy in the passive mode this parameter will be ignored. # # Mandatory: no # Range: 1-3600 # Default: # DataSenderFrequency=1 DataSenderFrequency=5 ############ ADVANCED PARAMETERS ################ ### Option: StartPollers # Number of pre-forked instances of pollers. # # Mandatory: no # Range: 0-1000 # Default: # StartPollers=5 StartPollers=300 ## Option: StartIPMIPollers # Number of pre-forked instances of IPMI pollers. # # Mandatory: no # Range: 0-1000 # Default: StartIPMIPollers=0 ### Option: StartPollersUnreachable # Number of pre-forked instances of pollers for unreachable hosts (including IPMI). # # Mandatory: no # Range: 0-1000 # Default: StartPollersUnreachable=100 ### Option: StartTrappers # Number of pre-forked instances of trappers. # Trappers accept incoming connections from Zabbix sender and active agents. # # Mandatory: no # Range: 0-1000 # Default: # StartTrappers=5 StartTrappers=30 ### Option: StartPingers # Number of pre-forked instances of ICMP pingers. # # Mandatory: no # Range: 0-1000 # Default: # StartPingers=1 StartPingers=50 ### Option: StartDiscoverers # Number of pre-forked instances of discoverers. # # Mandatory: no # Range: 0-250 # Default: # StartDiscoverers=1 StartDiscoverers=0 ### Option: StartHTTPPollers # Number of pre-forked instances of HTTP pollers. # # Mandatory: no # Range: 0-1000 # Default: # StartHTTPPollers=1 StartHTTPPollers=50 ### Option: JavaGateway # IP address (or hostname) of Zabbix Java gateway. # Only required if Java pollers are started. # # Mandatory: no # Default: JavaGateway=127.0.0.1 ### Option: JavaGatewayPort # Port that Zabbix Java gateway listens on. # # Mandatory: no # Range: 1024-32767 # Default: JavaGatewayPort=10052 ### Option: StartJavaPollers # Number of pre-forked instances of Java pollers. # # Mandatory: no # Range: 0-1000 # Default: StartJavaPollers=100 ### Option: StartVMwareCollectors # Number of pre-forked vmware collector instances. # # Mandatory: no # Range: 0-250 # Default: # StartVMwareCollectors=0 #StartVMwareCollectors=50 ### Option: VMwareFrequency # How often Zabbix will connect to VMware service to obtain a new data. # # Mandatory: no # Range: 10-86400 # Default: # VMwareFrequency=60 ### Option: VMwareCacheSize # Size of VMware cache, in bytes. # Shared memory size for storing VMware data. # Only used if VMware collectors are started. # # Mandatory: no # Range: 256K-2G # Default: # VMwareCacheSize=8M ### Option: SNMPTrapperFile # Temporary file used for passing data from SNMP trap daemon to the proxy. # Must be the same as in zabbix_trap_receiver.pl or SNMPTT configuration file. # # Mandatory: no # Default: SNMPTrapperFile=/tmp/zabbix_traps.tmp ### Option: StartSNMPTrapper # If 1, SNMP trapper process is started. # # Mandatory: no # Range: 0-1 # Default: StartSNMPTrapper=1 # List of comma delimited IP addresses that the trapper should listen on. # Trapper will listen on all network interfaces if this parameter is missing. # # Mandatory: no # Default: # ListenIP=0.0.0.0 ### Option: HousekeepingFrequency # How often Zabbix will perform housekeeping procedure (in hours). # Housekeeping is removing unnecessary information from history, alert, and alarms tables. # # Mandatory: no # Range: 1-24 # Default: # HousekeepingFrequency=1 ### Option: CacheSize # Size of configuration cache, in bytes. # Shared memory size, for storing hosts and items data. # # Mandatory: no # Range: 128K-2G # Default: # CacheSize=8M CacheSize=256M ### Option: StartDBSyncers # Number of pre-forked instances of DB Syncers # # Mandatory: no # Range: 1-100 # Default: StartDBSyncers=10 ### Option: HistoryCacheSize # Size of history cache, in bytes. # Shared memory size for storing history data. # # Mandatory: no # Range: 128K-2G # Default: # HistoryCacheSize=8M HistoryCacheSize=128M ### Option: HistoryTextCacheSize # Size of text history cache, in bytes. # Shared memory size for storing character, text or log history data. # # Mandatory: no # Range: 128K-2G # Default: # HistoryTextCacheSize=16M #HistoryTextCacheSize=128M ### Option: Timeout # Specifies how long we wait for agent, SNMP device or external check (in seconds). # # Mandatory: no # Range: 1-30 # Default: # Timeout=3 Timeout=30 ### Option: TrapperTimeout # Specifies how many seconds trapper may spend processing new data. # # Mandatory: no # Range: 1-300 # Default: TrapperTimeout=300 ### Option: UnreachablePeriod # After how many seconds of unreachability treat a host as unavailable. # # Mandatory: no # Range: 1-3600 # Default: UnreachablePeriod=60 ### Option: UnavailableDelay # How often host is checked for availability during the unavailability period, in seconds. # # Mandatory: no # Range: 1-3600 # Default: UnavailableDelay=60 ### Option: UnreachableDelay # How often host is checked for availability during the unreachability period, in seconds. # # Mandatory: no # Range: 1-3600 # Default: UnreachableDelay=5 ### Option: ExternalScripts # Full path to location of external scripts. # Default depends on compilation options. # # Mandatory: no # Default: # ExternalScripts=${datadir}/zabbix/externalscripts ExternalScripts=/usr/lib/zabbix/externalscripts ### Option: FpingLocation # Location of fping. # Make sure that fping binary has root ownership and SUID flag set. # # Mandatory: no # Default: # FpingLocation=/usr/sbin/fping ### Option: Fping6Location # Location of fping6. # Make sure that fping6 binary has root ownership and SUID flag set. # Make empty if your fping utility is capable to process IPv6 addresses. # # Mandatory: no # Default: # Fping6Location=/usr/sbin/fping6 ### Option: SSHKeyLocation # Location of public and private keys for SSH checks and actions. # # Mandatory: no # Default: # SSHKeyLocation= ### Option: LogSlowQueries # How long a database query may take before being logged (in milliseconds). # Only works if DebugLevel set to 3 or 4. # 0 - don't log slow queries. # # Mandatory: no # Range: 1-3600000 # Default: LogSlowQueries=20000 ### Option: TmpDir # Temporary directory. # # Mandatory: no # Default: # TmpDir=/tmp ### Option: AllowRoot # Allow the proxy to run as 'root'. If disabled and the proxy is started by 'root', the proxy # will try to switch to user 'zabbix' instead. Has no effect if started under a regular user. # 0 - do not allow # 1 - allow # # Mandatory: no # Default: # AllowRoot=0 ### Option: Include # You may include individual files or all files in a directory in the configuration file. # Installing Zabbix will create include directory in /usr/local/etc, unless modified during the compile time. # # Mandatory: no # Default: # Include= # Include=/usr/local/etc/zabbix_proxy.general.conf # Include=/usr/local/etc/zabbix_proxy.conf.d/ ####### LOADABLE MODULES ####### ### Option: LoadModulePath # Full path to location of proxy modules. # Default depends on compilation options. # # Mandatory: no # Default: # LoadModulePath=${libdir}/modules ### Option: LoadModule # Module to load at proxy startup. Modules are used to extend functionality of the proxy. # Format: LoadModule= # The modules must be located in directory specified by LoadModulePath. # It is allowed to include multiple LoadModule parameters. # # Mandatory: no # Default: # LoadModule=