[ZBXNEXT-618] No IP Address Info for (read only users) Created: 2011 Jan 13 Updated: 2011 Dec 22 Resolved: 2011 Jan 17 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F) |
Affects Version/s: | 1.8.2, 1.8.3, 1.8.4, 1.8.5, 1.9.1 (alpha), 1.9.2 (alpha), 1.9.3 (alpha), 2.0.0 |
Fix Version/s: | 2.0.0 |
Type: | New Feature Request | Priority: | Blocker |
Reporter: | Sol Arioto | Assignee: | Alexei Vladishev |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified | ||
Environment: |
Ubuntu 10.04, Mysql5, zabbix 1.8.3 |
Description |
I've just noticed recently; because i never typically log in as a basic user with only read access I believe one of two ways would help fix this would be to either allow {IPADDRESS} macro in trigger name example "Link to {HOSTNAME} Down @ {IPADDRESS}" Allowing the info in the inventory section might also make more use of that area.. |
Comments |
Comment by richlv [ 2011 Jan 13 ] |
this will be fixed in 2.0 by introducing monitoring -> hosts |
Comment by Sol Arioto [ 2011 Jan 17 ] |
Fix per version 2.0 |
Redesign forms to MVC rails and migrate javascript from Prototype to jQuery
(ZBXNEXT-870)
[ZBXNEXT-903] Redesign Configuration->Items Created: 2011 Aug 24 Updated: 2017 May 31 Resolved: 2012 Mar 22 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F) |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | Change Request (Sub-task) | Priority: | Blocker |
Reporter: | Eduards Samersovs (Inactive) | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 0 |
Labels: | itemconfigform | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Attachments: | item-interface.png | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Issue Links: |
|
Description |
Specification http://zabbix.org/wiki/Docs/specs/ZBXNEXT-903 |
Comments |
Comment by richlv [ 2011 Sep 02 ] |
if this refers to item config form, would be nice to take |
Comment by richlv [ 2012 Jan 20 ] |
(1) redesign seems to be fairly nice, but there seems to be no design document at all. current implementation should be documented on the specification wiki and basically describe how it works now (field order, value mappings and applications being sorted alphabetically etc etc) <alexei> We need design doc! I have so many ideas for this form. <richlv> just to note down that current spec is seriously lacking - doesn't list field ordering, field visibility depending on contents of other fields etc <richlv> sorry, this doesn't work. i don't know how should i put it. THIS DOESN'T WORK. |
Comment by dimir [ 2012 Jan 25 ] |
(2) When doing "mass update" of SNMPv3 (authPriv) item to change it to SNMPv2c the "SNMPv3 auth passphrase" and "SNMPv3 priv passphrase" fields are left in the form after update. The bug is not reproduced with direct item edit, only when doing mass update. FYI in 1.8 it's reproduced in both cases. <dimir> CLOSED. Moved to a separate issue |
Comment by richlv [ 2012 Jan 26 ] |
item filter issues are also being looked at. as such, the following would be nice to consider : |
Comment by Eduards Samersovs (Inactive) [ 2012 Jan 28 ] |
Implemented in development branch svn://svn.zabbix.com/branches/dev/ZBXNEXT-903 |
Comment by Oleksii Zagorskyi [ 2012 Jan 29 ] |
(3) [Usability] I need to scroll page vertically to save an item changes -> unexpected. <Eduard> Have decided not create new Tab, because all fields are important.. So it's ok. <alexei> Yes, it is ok. We decided not to introduce any new tabs for now. CLOSED |
Comment by Oleksii Zagorskyi [ 2012 Jan 29 ] |
At least the <Eduard> RESOLVED |
Comment by Alexei Vladishev [ 2012 Jan 30 ] |
(4) Connect as an user having read-write permission to a host Configuration->Hosts->Items (click on a host having templated items), click on a template item. See errors below the form: reset() expects parameter 1 to be array, null given [include/forms.inc.php:951] <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexei Vladishev [ 2012 Jan 30 ] |
(5) Configuration->Templates, click on template items You will see list of items of a host, not template. It seems host selection is remembered in item filter. <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexei Vladishev [ 2012 Jan 30 ] |
(6) Configuration->Hosts->Items Click on a template Template_Linux in item name "Template_Linux:Buffers memory". You are supposed to see list of Template_Linux items, however host items are displayed. Probably related to (5). <Eduard> (5) RESOLVE this issue <Vedmak> CLOSED |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Jan 31 ] |
(7) If the host doesn't have any available interfaces for the selected item type, the interface select element breaks (tested in Firefox). https://support.zabbix.com/secure/attachment/17947/item-interface.png <Eduard> RESOLVED )) <pavels> CLOSED. |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Jan 31 ] |
(8) when selecting some SNMP or IPMI type, the select key button becomes disabled, but the input itself is still editable. <Eduard> It's ok, for SNMP and IMPI user type key by hands.. <pavels> Oh, OK. CLOSED. |
Comment by Alexei Vladishev [ 2012 Jan 31 ] |
(9) Configuration->Hosts->Items Look at the debug information. The amount of API calls, permission checks and unnecessarily data exchange kills performance. It has to be fixed. <Eduard> RESOLVED <Vedmak> There is still quite a lot sqls.. ~130 more than in trunk. Maybe we should discuss that problem together. <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Jan 31 ] |
(10) It would be nice to vertically align the custom multiplier checkbox, in firefox it's shifted to the top. <Eduard> RESOLVED, still not in css at this time.. <pavels> Ok, CLOSED. |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Jan 31 ] |
(11) Maybe we should group the input fields into several logical groups (e.g. type specific fields, intervals and history, applications) and add a margin between them? The form would be more usable, and it will be clearer, how the fields depend on each other. <pavels> After some discussion with Eduards and Sasha we've decided not to do that now. CLOSED. |
Comment by Alexei Vladishev [ 2012 Jan 31 ] |
(12) Applications not sorted in the list of item prototypes "CPU, Availability", must be "Availability, CPU". <Eduard> RESOLVED <Vedmak> Sorting is not natural: 1, 12, 2. <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Jan 31 ] |
(13) In configurations.item.edit.php: <Eduard> RESOLVED <pavels> I don't think that using large ternary operators in function calls is a good idea. I mean blocks like: $itemFormList->addRow(_('Host'), array( |
Comment by Alexei Vladishev [ 2012 Jan 31 ] |
(14) Please fix <Eduard> RESOLVED also in Hosts and Host inventories. <alexei> please make 'Filter' preferred action, i.e. mark it with yellow border <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexei Vladishev [ 2012 Feb 01 ] |
(15) Only interfaces matching item type must be displayed. If no interfaces found then empty (or ' <Eduard> RESOLVED <alexei> it is not correct, the logic must be as follows: case ITEM_TYPE_ZABBIX: <Eduard> RESOLVED" <pavels> I think the message should read "No interfaceS found". Plus, when we try to submit a form with that message, it still submits some interface ID and the error message reads "Item uses incorrect interface type" instead of "No interface for item". <Eduard> After discussion with Pavels we decided not to do this. CLOSED <pavels> Wait, we've decided no to change the "No interface found" message, the part about the error remains. REOPENED. <Eduard> RESOLVED <pavels> CLOSED. |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Feb 03 ] |
(16) Regarding itemTypeInterface() in functions.js. It's not a good idea to duplicate this logic on the client side. I think we should pass the interface mapping rules as an associative array from the PHP side. <Eduard> RESOLVED, impl. without any array.. <Vedmak> I'm not sure what it was about initially, but "insert_javascript_itemTypeInterface" must be removed from CItemGeneral class And i think Pavel's idea about implementation was that we should not change more than one function/method if we add new interface. <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Feb 03 ] |
(17) In the item mass update form the "show value mappings" link should not be displayed if the value "show value" checkbox is unchecked. <Eduard> RESOLVED <pavels> The "show value mapping" link is broken (leads to config.php) <Eduard> RESOLVED <pavels> CLOSED. |
Comment by Alexei Vladishev [ 2012 Feb 03 ] |
(18) Please fix <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexander Vladishev [ 2012 Feb 03 ] |
(19) "Log time format" field should be visible only with "Type of information" = "Log" <Eduard> RESOLVED <Sasha> CLOSED |
Comment by Alexander Vladishev [ 2012 Feb 03 ] |
(20) "SNMP OID", "SNMP community" and "Port" fields should not be visible with "Type of information" = "Character" <Eduard> RESOLVED <Sasha> CLOSED |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Feb 03 ] |
(21) in the "copy to" form in FireFox there is no margin between the "target" label and the lower border. <Eduard> RESOLVED <pavels> CLOSED. |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Feb 03 ] |
(22) The "Group" drop down is not working in firefox in the "copy to" form. <Eduard> RESOLVED <pavels> CLOSED. |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Feb 03 ] |
(23) In configuration.item.edit.js the two jQuery.ready blocks should be united in one. <Eduard> RESOLVED <pavels> CLOSED. |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Feb 03 ] |
(24) In configuration.item.edit.php the numerous zbx_subarray_push should be somehow restructured to be more maintainable. <Eduard> After discussion with Pavels we decided optimize it not in this time. CLOSED |
Comment by Alexey Fukalov [ 2012 Feb 03 ] |
(25) [GUI] <Eduard> RESOLVED <pavels> CLOSED. |
Comment by Alexey Fukalov [ 2012 Feb 03 ] |
(26) [GUI] <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Feb 03 ] |
(27) [GUI] <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Feb 03 ] |
(28) [GUI] Also that button has "hand" cursor even if disabled. <Eduard> Cursor RESOLVED <Vedmak> "Select" button should be disabled also for "Zabbix trapper", "External check", "Database monitor", "SSH agent", "TELENT agent", "JMX agent", "Calculated" item types. <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Feb 03 ] |
(29) [GUI] <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Feb 03 ] |
(30) [GUI] <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Feb 03 ] |
(31) [GUI] <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Feb 03 ] |
(32) [GUI] <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Feb 03 ] |
(33) [GUI] <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexander Vladishev [ 2012 Feb 03 ] |
(34) [GUI] flexible intervals in "Mass update" and "Item" forms should be unified. <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Feb 06 ] |
(35) [GUI] <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Feb 06 ] |
(36) [GUI] <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by richlv [ 2012 Feb 07 ] |
(37) add an application to an item that has a name : try to use it in item subfilter : [02/07/2012 12:59:18 AM] JavaScript - items.php?sid=df9ac3e9bc8c64ca&form_refresh=4&filter_groupid=0&filter_hostid=0&filter_group=&filter_hostname=2&filter_application=&filter_name=&filter_key=&filter_type=-1&filter_delay=&filter_value_type=-1&filter_history=&filter_trends=&filter_status=-1&filter_with_triggers=-1&filter_templated_items=-1&subfilter_apps%5BU%23%25%40%26*%23%24%40%26*%23%24%26%24%40%232%5D=U%23%25%40%26*%23%24%40%26*%23%24%26%24%40%232 <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Feb 07 ] |
(38) [GUI] <Eduard> RESOLVED <Vedmak> Previous fixed, but i found one more case. When select "Type of information" numeric unsigned and "Data type" boolean, multiplier fields are hidden, then change <Vedmak> CLOSED |
Comment by Eduards Samersovs (Inactive) [ 2012 Feb 08 ] |
trunk r.25256 version pre-1.9.10 |
Comment by richlv [ 2012 Mar 21 ] |
(39) the merge has resurrected hosts_mon.php file, which was deleted in rev 24986 <Eduard> Out of |
[ZBXNEXT-1220] Monitoring of log files more than 2GB Created: 2012 May 14 Updated: 2012 Oct 31 Resolved: 2012 May 18 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Agent (G), Installation (I), Proxy (P), Server (S) |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | Change Request | Priority: | Critical |
Reporter: | Alexander Vladishev | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 0 |
Labels: | logmonitoring | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Issue Links: |
|
Description |
Currently monitoring of log-files is limited by 2 gigabytes since a field of a database has the 32-bbit signed integer type. The size of this field shall be increased to 64-bit integer type. |
Comments |
Comment by Alexander Vladishev [ 2012 May 14 ] |
Available in the development branch svn://svn.zabbix.com/branches/dev/ZBXNEXT-1220 |
Comment by dimir [ 2012 May 15 ] |
(1) On a 32-bit system agent fails when doing stat() of the log file in a process_log() function, which results in an item becoming NOTSUPPORTED: [...] $ ls -l /tmp/big.log $ ls -lh /tmp/big.log <Sasha> RESOLVED in r27551. <dimir> CLOSED |
Comment by Alexander Vladishev [ 2012 May 16 ] |
Related issue: |
Comment by dimir [ 2012 May 16 ] |
Successfully tested. Log monitoring is working for files over 2GB on 32-bit systems. Also confirm that this fixes vfs.file.size[] report for files over 2GB (was ZBX_UNSUPPORTED before). |
Comment by dimir [ 2012 May 16 ] |
(1) This enables general support for files larger than 2GB on Zabbix side (all components), I suggest this be documented as new 2.0 feature. <richlv> documented in http://www.zabbix.com/documentation/2.0/manual/introduction/whatsnew200 -> RESOLVED |
Comment by Alexander Vladishev [ 2012 May 16 ] |
(2) Should be documented DB upgrade patches from 2.0.0rc4 to 2.0.0rc5 in the release notes. IBM DB2: MySQL: Oracle: PostgreSQL: <dimir> While at it, could next info also added? When upgrading from 2.0.0rc2 to 2.0.0rc3, if proxy is used and proxy uses MySQL: <Sasha> we supports incremental patches only from version 2.0.0rc4 |
Comment by Alexander Vladishev [ 2012 May 16 ] |
Available in version pre-2.0.0 r27570. |
Comment by dimir [ 2012 May 18 ] |
Reopening because of regression. After this fix Zabbix will not compile on Solaris (SPARC) anymore. |
Comment by dimir [ 2012 May 18 ] |
(3) Disable large file support on 32-bit Solaris. On a 32-bit Solaris large file support is incompatible with procfs and swapctl. There is a way to do that though by using transitional compilation environment but this has to wait at least till 2.0 is out. See lfcompile64(5) for details. RESOLVED in svn://svn.zabbix.com/branches/dev/ZBXNEXT-1220 <Sasha> CLOSED |
Comment by richlv [ 2012 May 18 ] |
(4) document "(3)" <dimir> RESOLVED <martins-v>CLOSED |
Comment by Alexander Vladishev [ 2012 May 18 ] |
Available in version pre-2.0.0 r27637. |
[ZBXNEXT-1182] API method to add hostgroup to usergroup rights Created: 2012 Apr 11 Updated: 2014 May 08 Resolved: 2014 May 08 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | API (A) |
Affects Version/s: | 1.8.11, 2.0.0 |
Fix Version/s: | 2.0.0 |
Type: | New Feature Request | Priority: | Major |
Reporter: | Kodai Terashima | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 0 |
Labels: | permissions, usergroups | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Issue Links: |
|
Description |
Zabbix 1.8 and 2.0 do not have API method to add hostgroup to usergroup rights so that it's need to add hostgroup to usergroup rights from frontend even if user create new hostgroup using API. |
Comments |
Comment by richlv [ 2014 May 07 ] |
this seems to be available in 2.0, see the example at https://www.zabbix.com/documentation/2.0/manual/appendix/api/usergroup/create - can this issue be closed ? |
Comment by Kodai Terashima [ 2014 May 08 ] |
Yes, seems it can be closed. |
[ZBXNEXT-1161] The IT services API Created: 2012 Mar 22 Updated: 2012 Apr 19 Resolved: 2012 Apr 17 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | API (A) |
Affects Version/s: | 1.9.9 (beta) |
Fix Version/s: | 2.0.0 |
Type: | New Feature Request | Priority: | Major |
Reporter: | Pavels Jelisejevs (Inactive) | Assignee: | Pavels Jelisejevs (Inactive) |
Resolution: | Fixed | Votes: | 0 |
Labels: | api, itservices | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Description |
An API for working with IT services will be implemented in 2.0. |
Comments |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Mar 22 ] |
(1) IT service dependencies are not documented at all. |
Comment by richlv [ 2012 Apr 02 ] |
(2) and let's not forget to document and extensively review the documentation for this new api |
Comment by Alexey Fukalov [ 2012 Apr 16 ] |
(3) <pavels> RESOLVED. <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Apr 16 ] |
(4) <pavels> RESOLVED. <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Apr 17 ] |
(5) <pavels> RESOLVED. <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Apr 17 ] |
(6) <pavels> RESOLVED. <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Apr 17 ] |
(7) <pavels> RESOLVED. <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Apr 17 ] |
(8) <pavels> RESOLVED. <Vedmak> CLOSED |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Apr 18 ] |
Available in trunk r26941. |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Apr 19 ] |
(9) A regression: impossible to remove all service times. <pavels> RESOLVED. <Vedmak> CLOSED <pavels> Fixed in r26967. |
[ZBXNEXT-1162] Zabbix backend performance tuning Created: 2012 Mar 22 Updated: 2012 Mar 29 Resolved: 2012 Mar 22 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Proxy (P), Server (S) |
Affects Version/s: | 1.9.9 (beta) |
Fix Version/s: | 2.0.0 |
Type: | Change Request | Priority: | Major |
Reporter: | Alexander Vladishev | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 0 |
Labels: | performance | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Comments |
Comment by Alexander Vladishev [ 2012 Mar 22 ] |
Available in the development branch svn://svn.zabbix.com/branches/dev/ZBXNEXT-1162 |
Comment by richlv [ 2012 Mar 24 ] |
any more information on what exactly was improved regarding the processing of the triggers ? <zalex> yes, the issue cannot be closed without the answer to this question <dimir> Basically there are 2 improvements:
Am I right, sasha? <Sasha> You are absolutely right! |
Comment by dimir [ 2012 Mar 28 ] |
Successfully tested! Please review my small style fixes in r26455. |
Comment by dimir [ 2012 Mar 28 ] |
(1) Wait, there is one issue with trigger update but need to collect more information. <dimir> So if the trigger status is PROBLEM and we update the trigger after that we will not get recovery message when trigger goes to OK state. I guess this is by design. CLOSED |
Comment by dimir [ 2012 Mar 29 ] |
Successfully tested, do not forget to review my small changes in r26455. <Sasha> Thanks! CLOSED |
Comment by Alexander Vladishev [ 2012 Mar 29 ] |
Fixed in version pre-2.0.0rc3 r26477. |
[ZBXNEXT-641] Text Item : Accept empty value (like EOL) without unsupported Created: 2011 Jan 28 Updated: 2011 Dec 22 Resolved: 2011 May 20 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Agent (G) |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | New Feature Request | Priority: | Major |
Reporter: | Christophe | Assignee: | Alexei Vladishev |
Resolution: | Duplicate | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Issue Links: |
|
Description |
If a text item receive an empty value (or only an EOL) it will turn into "not supported". You can find more details here : http://www.zabbix.com/forum/showthread.php?p=79327#post79327 |
Comments |
Comment by richlv [ 2011 May 20 ] |
was implemented as |
[ZBXNEXT-647] Automatic population of hardware profiles Created: 2011 Feb 02 Updated: 2011 Dec 22 Resolved: 2011 May 09 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F), Server (S) |
Affects Version/s: | 1.9.1 (alpha) |
Fix Version/s: | 2.0.0 |
Type: | New Feature Request | Priority: | Major |
Reporter: | Alexander Vladishev | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 4 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Attachments: | bug_11.png bug_16.png bug_22.png bug_24.png bug_26.png bug_27.png bug_4.png bug_5.png bug_9.png import_test_host.xml | ||||||||||||
Issue Links: |
|
Description |
Zabbix should automatically fill host profiles by the information collected by Zabbix Server and Proxies. It would be nice to have both automatic and manual filling of profile details or a combination of both. |
Comments |
Comment by richlv [ 2011 Feb 02 ] |
also see |
Comment by Alexander Vladishev [ 2011 Feb 02 ] |
1. Database changes: Table 'items': FIELD |profile_link |t_integer |'0' |NOT NULL |ZBX_SYNC profile_link: pointer to one of profile fields, 1-N. 0 - not used for profiles. Numbering will match field number in table structure. Table 'hosts_profiles': FIELD |profile_mode |t_integer |'0' |NOT NULL |ZBX_SYNC profile_mode: 0 - manual, 1 - automatic 2. Configuration of item form will be extended to have an optional selection of a host profile field. If set, the item value will overwrite information stored in the corresponding profile field (for example, Device type, MAC Address, etc) The selection will be available for items of any type except of value type 'Log'. It will look like: Use in profiles [X] This selection will be located before Description field 3. Template linkage should be extended to verify that there are no two items pointing to the same profile field. 4. It should be possible to change profile linkage even if an item is linked to a template. 5. Host profile may have the following states: Disabled - no host profile information available, Manual - manually entered host profile information, Automatic - linked fields are updated automatically, other fields can be manually modified. The profile state is configurable on per host level as it is in 1.8.x 6. Host mass-updated will be extended to support setting of different profile modes (manual, automatic, disabled). 7. Not supported and Disabled items are treated as a normal items, i.e. the linkage will be preserved. 8. Item prototypes are not affected 9. If a host profile in Automatic mode and a profile field has a linkage, the profile field should be disabled, show actual value and display information about linked item (as a item name linked to configuration of the item). ---------------------------------- N. New report will be introduced to display inventory information and number of hosts grouped by one of inventory fields.For example, grouping by OS: Linux: 450 hosts, Windows: 5 hosts. The existing Inventory report will be extended to support this. Additional drop-down "Aggregate by" will be introduced to select a host profile field for grouping purposes. Only fields having varchar() type can be used due to performance considerations. By default, drop-down selection is set to <no aggregation>. |
Comment by richlv [ 2011 Feb 03 ] |
maybe "Update profile field" ? just "Update profile" might be confusing additional data, supported by the linux agent, will be available as items, right ? |
Comment by richlv [ 2011 Feb 28 ] |
4. seemingly split out as |
Comment by richlv [ 2011 Feb 28 ] |
7. also listed at |
Comment by Alexander Vladishev [ 2011 Apr 19 ] |
(1) [DB] Error while upgrading database (MySQL): <KB> Fixed ERROR: insert or update on table "opgroup" violates foreign key constraint "c_opgroup_1" <KB> Looks good, CLOSED. |
Comment by Alexander Vladishev [ 2011 Apr 26 ] |
(3) [DB] Please see my changes in db schema. Now the 'profile_mode' field location after the 'hostid' field <KB> Tested, works good. CLOSED. |
Comment by Gergely Czuczy [ 2011 May 03 ] |
If i may suggest, it'd be very nice, if this profile filling could work from SNMP OIDs as well. Some information also available over snmp, a few for an example: And a few vendor-specific extensions, like cisco exports the running image's name, which is the software version practically. Would be very nice if some of the profile could be populated using SNMP information. |
Comment by richlv [ 2011 May 03 ] |
i believe that any item would be able to be set as a source for profile field data, which does not exclude snmp items |
Comment by Konstantin Buravcov (Inactive) [ 2011 May 09 ] |
Merger to trunk rev 19442 |
[ZBXNEXT-412] Update of Brazilian Portuguese Translation - until 1.8.x/1.9 release 12771 Created: 2010 Jun 16 Updated: 2011 Dec 22 Resolved: 2010 Jun 16 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | None |
Affects Version/s: | 1.8.3, 2.0.0 |
Fix Version/s: | 1.8.3, 2.0.0 |
Type: | Change Request | Priority: | Major |
Reporter: | Edson G. Schubert | Assignee: | Alexei Vladishev |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified | ||
Environment: |
WEB Frontend |
Attachments: | pt_br.inc.zip |
Description |
Find attached file with the messages translations for Brazilian Portuguese updated to development release 12771 (1.8.x and 1.9). |
Comments |
Comment by Edson G. Schubert [ 2010 Jun 16 ] |
The mentioned translation file. |
Comment by richlv [ 2010 Jun 16 ] |
translation has escaped doublequotes - \"Multibyte String\" that should not be necessary - has this translation been created with a recent version of the frontend ? |
Comment by Edson G. Schubert [ 2010 Jun 16 ] |
Translations where exported with Zabbix Frontend from release 12771. |
Comment by richlv [ 2010 Jun 16 ] |
ok, then i'll consider that to be a leftover from some older version - thanks, committed |
[ZBXNEXT-592] Confirmation dialog for scripts Created: 2010 Dec 22 Updated: 2011 Jan 07 Resolved: 2011 Jan 03 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F) |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | New Feature Request | Priority: | Major |
Reporter: | Alexey Fukalov | Assignee: | Alexey Fukalov |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Comments |
Comment by Alexey Fukalov [ 2010 Dec 22 ] |
In Script configuration two new fields are added: Confirmation dialog have two buttons: Execute and Cancel. |
Comment by Alexey Fukalov [ 2010 Dec 27 ] |
Two new fields added to scripts table: Dialog minimum width is 200px, maximum width is 600px, if question is wider and has white spaces, it wraps. Form redesigned according to scetch. |
Comment by Alexey Fukalov [ 2011 Jan 03 ] |
Buttons form row wider than form |
Comment by Alexey Fukalov [ 2011 Jan 06 ] |
trunk 16676 |
Comment by Oleksii Zagorskyi [ 2011 Jan 06 ] |
FreeBSD8.1, MySQL 5.5 include(./include/forms/script.edit.php) [<a href='function.include'>function.include</a>]: failed to open stream: No such file or directory[/usr/local/www/zabbix/include/classes/class.cgetform.php:41] |
Comment by Oleksii Zagorskyi [ 2011 Jan 06 ] |
and... php5-5.3.3_2 |
Comment by Alexei Vladishev [ 2011 Jan 07 ] |
I see this error as well in trunk. It seems that merge went wrong for some reason. To be fixed asap. |
Comment by Alexey Fukalov [ 2011 Jan 07 ] |
Should be fixed. Some files didn't commit for some reason. |
[ZBXNEXT-674] Support of displaying all hosts of a given host group in maps Created: 2011 Feb 24 Updated: 2011 Aug 03 Resolved: 2011 Jun 22 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F) |
Affects Version/s: | 2.0.0 |
Fix Version/s: | 2.0.0 |
Type: | New Feature Request | Priority: | Major |
Reporter: | Alexander Vladishev | Assignee: | Aleksandrs Saveljevs |
Resolution: | Fixed | Votes: | 1 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Attachments: | bug_10.png bug_12.png bug_16.png bug_3.png bug_32.png bug_34.png bug_37.png bug_39.png bug_4.png bug_47.png bug_5.png bug_6.png bug_7.png bug_8.png bug_9.png |
Description |
Zabbix should support automatic placing of discovered devices or all devices of a given group on a map. It would simplify maintenance very much. |
Comments |
Comment by Alexander Vladishev [ 2011 Feb 24 ] |
It will be implemented the following way: 1) ''Host group' element will support new option "Show" having two possible values: 'Host group' and 'Host group elements' In case if 'Host group elements' option selected: 2) Host Group is a map region of NxM pixels or size of an entire map 3) All hosts of the selected host group will be displayed in the defined region. Host Group label will be used for each individual host displayed in the region. No border is displayed for the region, no region-level labels supported. 4) Initially the only supported placing algorithm will be 'left->right, top->bottom' evenly aligned. Hosts must not intersect if possible. Map grid alignment is ignored. 5) All displayed hosts will use icons defined for the Host Group 6) Host Group element can be linked to another map element. In this case the link will be automatically displayed for all elements of the Host Group. Host Group Region to Host Group Region linkage is allowed and will be displayed as a line connecting centers of these regions. It might be improved later on. 7) New fields should be added to table 'sysmaps_elements': FIELD |elementsubtype |t_integer |'0' |NOT NULL |ZBX_SYNC elementsubtype: 0 - host group, 1 - host group elements 8) API must be updated to support new element type as well as the new fields. Affected API methods: map.create, map.update, map.addElement, map.updateElement and map.get. 9) Map XML import/export must be updated accordingly Requirements update:
|
Comment by richlv [ 2011 Feb 24 ] |
when editing a map, how will such an element be displayed ? |
Comment by Alexander Vladishev [ 2011 Feb 25 ] |
Rich, the logic will be very similar to processing of images: >when editing a map, how will such an element be displayed ? Evenly distributed, there is a sketch. >how will this element be movable around the map by dragging (as in, which areas will start drag action) ? Same logic as for element type 'Image'. No processing of complex cases, it is up-to an user to deal with overlapping. <Richlv> hmm. is there some special logic for auto-aligning images ? or would host elements then just start overlapping if they don't fit neatly in the area ? |
Comment by richlv [ 2011 Feb 25 ] |
xml import/export ? |
Comment by Konstantin Buravcov (Inactive) [ 2011 Jun 20 ] |
(14) [GUI] Buttons "remove" and "-" does not work for me in IE8. Same is for links. <KB> Seems like a bug in IETester. Works in normal IE8. CLOSED. |
Comment by Konstantin Buravcov (Inactive) [ 2011 Jun 20 ] |
(15) [GUI] Trying to select host from a popup (creating element with type "host") gives me "'null' is null or not an object" in IE8 <KB> Seems like a bug in IETester. Works in normal IE8. CLOSED. |
Comment by Alexey Fukalov [ 2011 Jul 07 ] |
trunk 20458 |
Comment by richlv [ 2011 Aug 01 ] |
(51) regression - map border is not drawn anymore. see |
Comment by richlv [ 2011 Aug 03 ] |
also see |
[ZBXNEXT-626] Remembering of map grid options for each map Created: 2011 Jan 19 Updated: 2011 Dec 22 Resolved: 2011 Feb 11 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F) |
Affects Version/s: | 2.0.0 |
Fix Version/s: | 2.0.0 |
Type: | New Feature Request | Priority: | Major |
Reporter: | Alexei Vladishev | Assignee: | Konstantin Buravcov (Inactive) |
Resolution: | Fixed | Votes: | 1 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Issue Links: |
|
Description |
Map grid options (grid size, show/hide, align to grid) should be stored per each map individually. |
Comments |
Comment by Vladimir Barcevsky (Inactive) [ 2011 Feb 03 ] |
sorry |
Comment by Konstantin Buravcov (Inactive) [ 2011 Feb 07 ] |
Added API parameters and basic unit tests for map creation using JSON |
Comment by Konstantin Buravcov (Inactive) [ 2011 Feb 07 ] |
Added saving new options through GUI and a Selenium test for it |
Comment by Konstantin Buravcov (Inactive) [ 2011 Feb 08 ] |
API Documentation updated: |
Comment by richlv [ 2011 Feb 08 ] |
what about http://www.zabbix.com/documentation/2.0/manual/appendix/api/changes_1.8_-_2.0 ? konstantin> page updated rich> thanks |
Comment by Konstantin Buravcov (Inactive) [ 2011 Feb 08 ] |
Import/export works with new parameters. When importing from 1.8, they are set to default values. Issue can be marked as resolved, when DB patches are checked. |
Comment by Konstantin Buravcov (Inactive) [ 2011 Feb 09 ] |
Development branch: |
Comment by Konstantin Buravcov (Inactive) [ 2011 Feb 10 ] |
Merged to trunk rev 17615 |
Comment by richlv [ 2011 Feb 11 ] |
changelog entry seems to be missing |
Comment by Konstantin Buravcov (Inactive) [ 2011 Feb 11 ] |
Added changelog entry |
Comment by richlv [ 2011 Feb 11 ] |
changelog entry received |
[ZBXNEXT-635] Introduce API wrapper Created: 2011 Jan 25 Updated: 2017 May 31 Resolved: 2011 Mar 22 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | API (A) |
Affects Version/s: | 1.9.1 (alpha) |
Fix Version/s: | 2.0.0 |
Type: | Change Request | Priority: | Major |
Reporter: | Alexey Fukalov | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Comments |
Comment by Aleksandrs Saveljevs [ 2011 Jan 26 ] |
What is the purpose of API wrapper? Will it affect external client applications? |
Comment by Alexei Vladishev [ 2011 Jan 26 ] |
Currently there is no single function or a method to call API from PHP code. Now if you need to add an user, you call something like user.add() instead of doing apiCall('user.add'). The API wrapper allows us to call a single function instead of working with different objects directly. Another advantage of the API wrapper is better error processing and (theoretically) much cleaner code. |
Comment by richlv [ 2011 Jan 26 ] |
so something similar to andrew farley's php zabbix api class (http://andrewfarley.com/php/zabbix-1-8-api-php-class-v1-0) ? |
Comment by Alexei Vladishev [ 2011 Jan 26 ] |
Rich, absolutely not. The wrapper is an abstraction layer above all PHP classes. That's the point. The front-end will work with the API in a similar way as any other application based on the API. The wrapper can also be configured (it won't be supported from the very beginning) to forward all API calls to a different physical server if required. It's another nice step to separate GUI from the API. |
Comment by Konstantin Buravcov (Inactive) [ 2011 Feb 03 ] |
When testing this issue, please see if points that that are described in |
Comment by Alexey Fukalov [ 2011 Feb 17 ] |
trunk 17857 |
Comment by richlv [ 2011 Feb 18 ] |
i don't see this change documented or explained anywhere. svn diff -c 17857 |
Comment by richlv [ 2011 Feb 18 ] |
also, umm, "technical" documentation ? |
Comment by Aleksandrs Saveljevs [ 2011 Feb 21 ] |
As far as I understand, what was eventually implemented is different than what Alexei V. had in mind initially. What was the rationale for it? |
Comment by Alexey Fukalov [ 2011 Mar 03 ] |
Api acces option was removed because we are tending to make frontend communicate with DB only using api. So now frontend api calls are mostly same as usual api calls via jsonrpc. |
[ZBXNEXT-558] Support of monitoring auto-registered hosts with passive checks Created: 2010 Nov 10 Updated: 2015 Nov 20 Resolved: 2010 Nov 12 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Agent (G), Proxy (P), Server (S) |
Affects Version/s: | 2.0.0 |
Fix Version/s: | 2.0.0 |
Type: | New Feature Request | Priority: | Major |
Reporter: | Alexander Vladishev | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Issue Links: |
|
Comments |
Comment by Alexander Vladishev [ 2010 Nov 11 ] |
Available in development branch svn://svn.zabbix.com/branches/dev/ZBXNEXT-558 |
Comment by Alexander Vladishev [ 2010 Nov 12 ] |
Available in version pre1.9.1, r15431. |
Comment by richlv [ 2010 Nov 13 ] |
if multiple ips are configured for agentd listenip, what happens ? is the first one only sent to the server ? |
Comment by Aleksandrs Saveljevs [ 2010 Nov 13 ] |
Yes, only the first one. |
Comment by richlv [ 2011 Mar 24 ] |
new feature request about multiple ip addresses submitted as ZBXNEXT-717 |
[ZBXNEXT-483] need item to get file contents Created: 2010 Aug 20 Updated: 2011 Dec 22 Resolved: 2010 Aug 30 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Agent (G) |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | New Feature Request | Priority: | Major |
Reporter: | Aleksandrs Saveljevs | Assignee: | Aleksandrs Saveljevs |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Description |
There is a need for an item like vfs.file.contents[myfile.txt,<encoding>] to get contents of a file. |
Comments |
Comment by Aleksandrs Saveljevs [ 2010 Aug 20 ] |
Suggestions with regard to the item name are highly welcome. |
Comment by Aleksandrs Saveljevs [ 2010 Aug 30 ] |
Merged into pre-2.0 in r14150. |
[ZBXNEXT-623] Restore support of SQLite3 on Zabbix Server side Created: 2011 Jan 16 Updated: 2011 Jan 24 Resolved: 2011 Jan 18 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | None |
Affects Version/s: | 2.0.0 |
Fix Version/s: | 2.0.0 |
Type: | New Feature Request | Priority: | Major |
Reporter: | Alexei Vladishev | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Description |
It might be important for use of Zabbix in embedded environments and/or if used for monitoring of a relatively small amount of devices. |
Comments |
Comment by Alexei Vladishev [ 2011 Jan 24 ] |
Implemented in trunk, revision 17098. Now Zabbix GUI can be used with Zabbix Server with SQLite3 back-end database. |
[ZBXNEXT-630] Automatic filling of DNS name for discovered devices Created: 2011 Jan 19 Updated: 2014 Mar 14 Resolved: 2011 Feb 01 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | None |
Affects Version/s: | 2.0.0 |
Fix Version/s: | 2.0.0 |
Type: | New Feature Request | Priority: | Major |
Reporter: | Alexei Vladishev | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Issue Links: |
|
Description |
Host DNS names must be filled automatically by making reverse DNS requests on Zabbix Server or Proxy. |
Comments |
Comment by Alexander Vladishev [ 2011 Jan 29 ] |
Available in development branch svn://svn.zabbix.com/branches/dev/ZBXNEXT-630 |
Comment by Alexander Vladishev [ 2011 Feb 01 ] |
Available in version pre2.0, revision 17345. |
Comment by Marc Schoechlin [ 2011 Feb 08 ] |
That´s cool Especially in hosting-environments it is not always assured that reverse dns is available - you should use fqdn-hostname as fallback. Ideally, this behavior should be configurable.... |
[ZBXNEXT-512] unknown events should be redesigned Created: 2010 Sep 17 Updated: 2017 May 31 Resolved: 2010 Nov 03 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F), Server (S) |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | Change Request | Priority: | Major |
Reporter: | Aleksandrs Saveljevs | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 2 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Description |
The problems we currently have with UNKNOWN events: (1) Complicated logic for acknowledges. For instance, if we have PROBLEM -> UNKNOWN -> PROBLEM -> UNKNOWN -> PROBLEM, then acknowledging one PROBLEM event has to copy acknowledges to other PROBLEM events as well. (2) PROBLEM -> UNKNOWN -> PROBLEM is essentially a single PROBLEM. (3) When deciding if we need to add an event or not, we have to look into "events" table which slows down processing. (4) Complicated logic for calculating durations in GUI. (5) UNKNOWN events can mean different things that cannot be distinguished between. For instance: a trigger has just been created, one of the items became unsupported, trigger cannot be evaluated, a server has just been restarted. (6) UNKNOWN events hide the previous meaningful status: if a trigger was in the PROBLEM state before becoming UNKNOWN, then we have to look for the PROBLEM state manually. |
Comments |
Comment by Oleksii Zagorskyi [ 2010 Sep 17 ] |
Regarding the transfer all triggers status to UNKNOWN when you restart the zabbix_server (5). |
Comment by Aleksandrs Saveljevs [ 2010 Sep 17 ] |
After the new design is implemented, users in the GUI will only see OK and PROBLEM events. If something is wrong with the trigger (everything that would cause a generation of UNKNOWN events in the current design), then something like a "?" mark will be shown next to the trigger value: e.g., "OK". So after restarting zabbix_server you will see "OK" rather than UNKNOWN. |
Comment by Alexander Vladishev [ 2010 Nov 03 ] |
Available from version pre1.9.1, r15246. |
improvements to the user macro functionality
(ZBXNEXT-353)
[ZBXNEXT-518] add usermacro support in snmp port field Created: 2010 Sep 22 Updated: 2017 May 31 Resolved: 2011 Feb 04 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F), Proxy (P), Server (S) |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | Change Request (Sub-task) | Priority: | Major |
Reporter: | richlv | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 1 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Attachments: | supported macros 2.0.txt |
Description |
usermacros should be supported in snmp port field to allow for easy customisation of the port on lower level |
Comments |
Comment by Alexander Vladishev [ 2011 Feb 01 ] |
Attached list of supported macros after "multiple interfaces" implementation |
Comment by Alexander Vladishev [ 2011 Feb 04 ] |
Available in version pre2.0. |
[ZBXNEXT-457] Support of nanoseconds for history tables Created: 2010 Jul 23 Updated: 2023 Mar 04 Resolved: 2010 Aug 02 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F), Proxy (P), Server (S) |
Affects Version/s: | 2.0.0 |
Fix Version/s: | 2.0.0 |
Type: | Change Request | Priority: | Major |
Reporter: | Alexander Vladishev | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Attachments: | report-457-windows-agent-bug.txt | ||||||||||||
Issue Links: |
|
Description |
If the historical information (for example log monitoring) comes very intensively, i.e. some values in a second, macro {ITEM.VALUE}work incorrectly. |
Comments |
Comment by Oleksii Zagorskyi [ 2010 Jul 29 ] |
Alexander, I was testing a nano-second and I'm starting to like it. |
Comment by Alexander Vladishev [ 2010 Jul 30 ] |
Windows agents is available in svn://svn.zabbix.com/branches/dev/zbxnext-457 branch. |
Comment by Oleksii Zagorskyi [ 2010 Jul 30 ] |
Bug founded for windows agent. Windows not like nanoseconds IMHO |
Comment by Aleksandrs Saveljevs [ 2010 Jul 30 ] |
Can we add some dummy nanoseconds if the clock+ns pairs turn out to be identical? In the attachment above, if we are about to send several items with clock=1280483969 and ns=711000000, can we change the second ns to 711000001, etc.? We will not get real nanosecond precision anyway. |
Comment by Alexei Vladishev [ 2010 Jul 30 ] |
Good point! |
Comment by Oleksii Zagorskyi [ 2010 Jul 30 ] |
FreeBSD8.0 also not get REAL nanosecond (maybe is normally - i don't now). |
Comment by Alexei Vladishev [ 2010 Jul 30 ] |
Note that not all platforms support nanoseconds. It is a platform specific feature. |
Comment by Alexander Vladishev [ 2010 Jul 30 ] |
Added support nanoseconds for BSD and Linux platforms. Windows later. |
Comment by Alexander Vladishev [ 2010 Jul 30 ] |
r13724 - added support of nanoseconds under Windows. |
Comment by Oleksii Zagorskyi [ 2010 Jul 31 ] |
Tested. Now it seems everything is normal - windows agent generates the 'ns' of 9 digits. FreeBSD 8.0 also - 9 digits. |
Comment by Alexander Vladishev [ 2010 Aug 02 ] |
Added support of nanoseconds in ver. pre2.0 r13742. |
Comment by Oleksii Zagorskyi [ 2012 Jan 29 ] |
Just for record: available in first alpha 1.9.0 |
Comment by Oleksii Zagorskyi [ 2023 Feb 28 ] |
Just an update after ... 11 years Now zabbix server generates nanoseconds consequently with step just 1, not 9 digits as before. If send the same data again, it will generate SQL errors, which is expected in zabbix 6.0 due to primary keys (itemid-clock-ns): 227944:20230228:162907.374 [Z3008] query failed due to primary key constraint: [1062] Duplicate entry '42741-1677593860-1' for key 'history_str.PRIMARY' 227944:20230228:162907.374 skipped 1 duplicates 227944:20230228:162907.374 [Z3008] query failed due to primary key constraint: [1062] Duplicate entry '42741-1677593860-2' for key 'history_str.PRIMARY' 227944:20230228:162907.374 skipped 1 duplicates 227944:20230228:162907.375 [Z3008] query failed due to primary key constraint: [1062] Duplicate entry '42741-1677593860-3' for key 'history_str.PRIMARY' 227944:20230228:162907.375 skipped 1 duplicates 227944:20230228:162907.375 [Z3008] query failed due to primary key constraint: [1062] Duplicate entry '42741-1677593860-4' for key 'history_str.PRIMARY' 227944:20230228:162907.375 skipped 1 duplicates <sasha> This is because of the unique primary keys added in scope of
<zalex_ua> That's right and that's ok. I left the comment as just a note, it might help in future. I had a case where such SQL errors have been logged on a production installation, so we figured out that the same data with timestamps has been sent a few times by mistake. |
[ZBXNEXT-1048] api method to import/export xml Created: 2011 Dec 06 Updated: 2012 Apr 10 Resolved: 2012 Apr 10 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | API (A) |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | New Feature Request | Priority: | Major |
Reporter: | richlv | Assignee: | Alexei Vladishev |
Resolution: | Fixed | Votes: | 4 |
Labels: | xml | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Issue Links: |
|
Description |
it would be very useful to retrieve/send xml to api instead of going through the frontend. this would allow easier mass host adding, especially if they need directly attached entities (items, triggers). would help with |
Comments |
Comment by richlv [ 2012 Jan 14 ] |
it is hoped that this will be implemented in |
Comment by richlv [ 2012 Apr 10 ] |
implemented in |
Comment by Oleksii Zagorskyi [ 2012 Apr 10 ] |
See additionally |
[ZBXNEXT-631] Configurable colors and names for trigger severities Created: 2011 Jan 19 Updated: 2011 Mar 03 Resolved: 2011 Mar 03 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | None |
Affects Version/s: | 2.0.0 |
Fix Version/s: | 2.0.0 |
Type: | New Feature Request | Priority: | Major |
Reporter: | Alexei Vladishev | Assignee: | Alexey Fukalov |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Attachments: | bug_1.png |
Description |
It would be nice to have it supported for better flexibility. |
Comments |
Comment by Alexander Vladishev [ 2011 Feb 22 ] |
Available in the development branch svn://svn.zabbix.com/branches/dev/ZBXNEXT-631 |
Comment by richlv [ 2011 Feb 25 ] |
documentation available at http://www.zabbix.com/documentation/2.0/manual/config/triggers/customseverities |
Comment by Alexey Fukalov [ 2011 Mar 03 ] |
trunk 18212 |
[ZBXNEXT-366] Windows template needs improving Created: 2010 May 20 Updated: 2019 Mar 30 Resolved: 2012 Aug 01 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Agent (G) |
Affects Version/s: | 1.8.2 |
Fix Version/s: | 2.0.0 |
Type: | Change Request | Priority: | Major |
Reporter: | Tom | Assignee: | Alexei Vladishev |
Resolution: | Fixed | Votes: | 2 |
Labels: | templates, windows | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified | ||
Environment: |
Windows (all) |
Description |
Please make default windows template show cpu usage in windows format not linux format. Also network stats need to work out of the box |
Comments |
Comment by Tom [ 2010 May 20 ] |
For eg cpu % |
Comment by richlv [ 2010 May 28 ] |
regarding network interfaces, i believe that problem is with the way windows handles network interfaces - zabbix items need interface name, but network interface names are not consistent over windows installations. please correct me if that's wrong, i haven't used windows for a long time now |
Comment by Aleksandrs Saveljevs [ 2010 Jul 05 ] |
Windows template has the following items for monitoring the number of processes: proc.num[] The last two are outdated, undocumented, and not supported. |
Comment by richlv [ 2010 Jul 05 ] |
last two process counting items have been removed for appliance, expected to trickle down to data.sql in next version |
Comment by richlv [ 2012 Aug 01 ] |
templates were redone for 2.0, and windows template now uses lld for network interfaces. all the problems mentioned here should be solved by now |
Comment by Cesar Murilo da Silva Junior [ 2019 Mar 30 ] |
From which version are the items below discontinued? I'm in version 4.0.5, I can delete or disable them, right? system [procrunning] |
[ZBXNEXT-342] Set 'legacy encoding' for email alerts Created: 2010 May 05 Updated: 2010 Jun 16 Resolved: 2010 Jun 16 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Server (S) |
Affects Version/s: | 1.8.3 |
Fix Version/s: | 1.8.3, 2.0.0 |
Type: | New Feature Request | Priority: | Major |
Reporter: | Camden Buzard | Assignee: | Alexei Vladishev |
Resolution: | Fixed | Votes: | 1 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified | ||
Environment: |
slackware linux |
Description |
Recent changes causes zabbix to encode emails in utf-8 instead of 7bit ascii. Some smtp servers do not support this format resulting in garbled alerts. |
Comments |
Comment by Oleksii Zagorskyi [ 2010 Jun 16 ] |
This feature request can be closed now because https://support.zabbix.com/browse/ZBX-2011 improved. |
Comment by Aleksandrs Saveljevs [ 2010 Jun 16 ] |
Thanks! |
[ZBXNEXT-780] passive agents should be able to send empty strings Created: 2011 May 09 Updated: 2012 Jul 09 Resolved: 2012 Jan 26 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Agent (G), Documentation (D), Server (S) |
Affects Version/s: | 1.9.3 (alpha) |
Fix Version/s: | 1.9.5 (alpha), 2.0.0 |
Type: | New Feature Request | Priority: | Major |
Reporter: | Aleksandrs Saveljevs | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Issue Links: |
|
Description |
With the current protocol, when a server requests a value for a particular item, passive agent is expected to send a raw value in return. That is, if the result value is "abcdef", the agent will only put "abcdef" into the socket and nothing else (not even protocol headers). If the server does not get anything from the agent (which is also the case with an empty string), it assumes the agent dropped connection. |
Comments |
Comment by Aleksandrs Saveljevs [ 2011 May 09 ] |
One of the possible solutions is to make the agent (always or only in case of empty string) send Zabbix protocol headers. It will be understood by older servers, proxies, and zabbix_get. Another possible solution is to introduce a special return value, say, ZBX_EMPTY, in addition to ZBX_NOTSUPPORTED and ZBX_ERROR. The first solution seems to be more preferred, because someday we will have to introduce Zabbix protocol headers into the passive agent protocol anyway. |
Comment by richlv [ 2011 May 09 ] |
how would this affect a userparameter command returning empty string ? would that be supported after this change ? |
Comment by Rudolfs Kreicbergs [ 2011 May 13 ] |
Available in dev branch: svn://svn.zabbix.com/branches/dev/ZBXNEXT-780 1) Empty strings are now supported as valid values for both passive and active items |
Comment by Rudolfs Kreicbergs [ 2011 May 19 ] |
Available in pre-1.9.5 r19734. |
Comment by Oleksii Zagorskyi [ 2012 Jan 12 ] |
additionally noted here: http://www.zabbix.com/documentation/2.0/manual/introduction/whatsnew200#ability_to_send_empty_strings |
Comment by Oleksii Zagorskyi [ 2012 Jan 12 ] |
(7) [Documentation] Some phrases like: <zalex> CLOSED |
Comment by Martins Valkovskis [ 2012 Jan 26 ] |
The notes about empty strings accepted have been modified to say that it applies to textual items: http://www.zabbix.com/documentation/2.0/manual/installation/upgrade_notes <zalex> Reviewed. Great! Thanks. CLOSED |
Comment by Matteo Cerutti [ 2012 Jul 07 ] |
I upgraded zabbix to 2.0.1 but I missed to see this feature which actually broke part of my production monitoring. Is it possible to have the old behavior back by an option in zabbix agent config? Otherwise I will have to keep the old agent on the machines or keep patching the new one. Thanks. |
Comment by Matteo Cerutti [ 2012 Jul 07 ] |
For who is interested in reverting this behavior for UserParameters, just change under src/libs/zbxsysinfo/sysinfo.c line94 from EXECUTE_USER_PARAMETER& to EXECUTE_STR& I think Zabbix Agent should be a bit smarter when handling scripts in UserParameters. I like the fact the you can return empty strings and I see applications where I could take advantage of this feature. But if one doesn't want to report any data because none is available and simply exit the code without any data to stdout, I would expect Zabbix to throw an ZBX_NOTSUPPORTED error. The reason why I need the old behavior is that I rely on the fact that some plugins cannot provide certain information at a certain time. Because of some logic in the triggers I cannot afford to have an empty item and I'm happy to retain the last valid data received for the item until the information is available again and the items get updated. I think the best solution is for Zabbix Agent to handle the exit code for the scripts executed via the UserParameters. I guess that if one exit -1, Zabbix could throw the ZBX_NOTSUPPORTED. Thank you for your understanding. Keep up the good work! M |
Comment by Matteo Cerutti [ 2012 Jul 09 ] |
There's also another big change that broke my monitoring.. which is how the MACROS are passed to the zabbix agent. I had a few macros which contained "" since Zabbix would not allow me to have an empty macros. proc.num[{$APP_NAME},{$APP_USER},,{$APP_FILTER}] when $APP_FILTER is "", it's passed to the agent as \"\" and since the command line does not contain that it will always report a count of 0 processes. The old zabbix-agentd would not behave like this. As a result, I cannot re-define macros as empty in a link of templates. M |
Comment by richlv [ 2012 Jul 09 ] |
ability to return error state is ZBXNEXT-152 |
[ZBXNEXT-636] improve zabbix login screen Created: 2011 Jan 26 Updated: 2012 Apr 28 Resolved: 2011 Feb 21 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F) |
Affects Version/s: | 1.9.1 (alpha) |
Fix Version/s: | 2.0.0 |
Type: | Change Request | Priority: | Major |
Reporter: | Artem Suharev (Inactive) | Assignee: | Artem Suharev (Inactive) |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Issue Links: |
|
Comments |
Comment by Alexander Vladishev [ 2011 Feb 03 ] |
1. Restyle login screen (API wrapper) |
Comment by Artem Suharev (Inactive) [ 2011 Feb 21 ] |
Merged |
Comment by Oleksii Zagorskyi [ 2012 Apr 28 ] |
Fixed actually in v 1.9.2 |
[ZBXNEXT-575] New database and GUI design for remote commands Created: 2010 Dec 07 Updated: 2012 Nov 20 Resolved: 2011 Feb 14 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F), Server (S) |
Affects Version/s: | 2.0.0 |
Fix Version/s: | 2.0.0 |
Type: | Change Request | Priority: | Major |
Reporter: | Alexander Vladishev | Assignee: | Artem Suharev (Inactive) |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Attachments: | bug_28.png bug_30.png bug_31.png bug_35.png bug_36.jpg bug_44.png bug_45.png error-in-query.png operations.jpg screenshot-1.jpg screenshot-2.jpg |
Comments |
Comment by Oleksii Zagorskyi [ 2010 Dec 17 ] |
perhaps it makes sense to run simultaneously with |
Comment by Alexey Fukalov [ 2011 Jan 31 ] |
fixed 1, 5, 7 |
Comment by richlv [ 2011 Jan 31 ] |
in the light of this, it would be nice to consider |
Comment by richlv [ 2011 Jan 31 ] |
"Ne oparations defined" - sounds more dutch to me |
Comment by Konstantin Buravcov (Inactive) [ 2011 Feb 11 ] |
(43) |
Comment by richlv [ 2011 Apr 09 ] |
adding a "trigger value = problem" condition by default when creating a new action was not done, reported as |
Comment by richlv [ 2012 Nov 20 ] |
this resulted in a minor regression in it service configuration : |
[ZBXNEXT-511] items should have a description field Created: 2010 Sep 16 Updated: 2011 Dec 22 Resolved: 2011 Apr 05 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F), Server (S) |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | New Feature Request | Priority: | Major |
Reporter: | Aleksandrs Saveljevs | Assignee: | Aleksandrs Saveljevs |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Attachments: | bug_14.png bug_15.png bug_2.png bug_3.png bug_4.png bug_5.png |
Description |
Similarly to triggers that have comments and maintenances that have descriptions, items should have descriptions too. |
Comments |
Comment by richlv [ 2010 Sep 16 ] |
partially duplicates ZBXNEXT-337 and ZBX-2755 |
Comment by Alexey Fukalov [ 2010 Sep 22 ] |
fixed |
Comment by Aleksandrs Saveljevs [ 2010 Sep 23 ] |
Available in development branch svn://svn.zabbix.com/branches/dev/zbxnext-511-item-description. |
Comment by Aleksandrs Saveljevs [ 2010 Sep 29 ] |
Some of the changes to be made to database schema:
Will have to check whether other tables should be updated as well. |
Comment by richlv [ 2010 Sep 29 ] |
item multiplier/formula is very confusing, but it should also be taken in context of xml export, where field names sometimes can be matching, and sometimes - not |
Comment by Konstantin Buravcov (Inactive) [ 2010 Oct 19 ] |
DB patches and schema committed to svn://svn.zabbix.com/branches/dev/zbxnext-511-item-description |
Comment by richlv [ 2011 Jan 25 ] |
looks like this was never finished/merged ? |
Comment by Aleksandrs Saveljevs [ 2011 Jan 25 ] |
It will have to be done once again. |
Comment by Alexander Vladishev [ 2011 Feb 24 ] |
All right, we have to finish this task. Here is list of things to be done:
Re-naming of other table fields is out of scope. |
Comment by richlv [ 2011 Mar 22 ] |
(1) something to pay attention to : when attempting to create a discovery rule w/o name error message says : Incorrect value for field "description". the field is named "Name" <Vedmak> FIXED |
Comment by Aleksandrs Saveljevs [ 2011 Mar 30 ] |
(2) Undefined index when creating an item. The error message about item key is not helpful either. See bug_2.png. <Vedmak> FIXED |
Comment by Aleksandrs Saveljevs [ 2011 Mar 30 ] |
(3) The description text area does not look good in mass update. See bug_3.png. <Vedmak> FIXED |
Comment by Aleksandrs Saveljevs [ 2011 Mar 30 ] |
(4) When saving an item prototype, description is saved as its name. See bug_4.png. <Vedmak> FIXED |
Comment by Aleksandrs Saveljevs [ 2011 Mar 30 ] |
(5) On the trigger prototype page, it shows discovery rule's description instead on name. See bug_5.png. <Vedmak> FIXED |
Comment by Aleksandrs Saveljevs [ 2011 Mar 30 ] |
(6) Saving a trigger without name complains about incorrect value for field "description". <Vedmak> FIXED |
Comment by Aleksandrs Saveljevs [ 2011 Mar 30 ] |
Documented {ITEM.DESCRIPTION}and {ITEM.KEY}macros at http://www.zabbix.com/documentation/2.0/manual/appendix/macros/supported_by_location. |
Comment by Aleksandrs Saveljevs [ 2011 Mar 31 ] |
(7) In trigger list, triggers that are created by low-level discovery from trigger prototypes have links to discovery rules. These links are descriptions of discovery rules, not their names. <Vedmak> FIXED |
Comment by Aleksandrs Saveljevs [ 2011 Mar 31 ] |
(8) In "Latest data" filter it says: "Show items with description like". <Vedmak> FIXED |
Comment by Aleksandrs Saveljevs [ 2011 Mar 31 ] |
(9) I propose we replace 'description_expanded' with 'name_expanded'. Similarly, variable $item_description should be renamed to $item_name. Also, $max_desc_len should be $max_name_len. <Vedmak> FIXED |
Comment by Aleksandrs Saveljevs [ 2011 Mar 31 ] |
(10) In item list, filtering by name yields "Undefined index: filter_name[/home/asaveljevs/zabbix-svn/branches/dev/ZBXNEXT-511/frontends/php/items.php:860]". <Vedmak> FIXED |
Comment by Aleksandrs Saveljevs [ 2011 Mar 31 ] |
(11) Different issue, but configuration of discovered triggers can be accessed through "Triggers top 100" report. <Vedmak> it's not connected to this issue |
Comment by Aleksandrs Saveljevs [ 2011 Mar 31 ] |
(12) It is possible to create a trigger that references an item that does not exist. <Vedmak> FIXED <asaveljevs> Perfect. But since we started messing with invalid trigger expressions, could you please take a look at why we have an undefined index when switching trigger expression to " {Zabbix server: .last(0)}=0" (note the space in place of item key). <Vedmak> FIXED <asaveljevs> CLOSED |
Comment by Aleksandrs Saveljevs [ 2011 Mar 31 ] |
(13) It is possible to create a trigger that references a discovery rule. If we then click on that discovery rule in the trigger expression, we get no permissions error. <Vedmak> it's not connected to this issue |
Comment by Aleksandrs Saveljevs [ 2011 Mar 31 ] |
(14) Undefined index when accessing "Configuration" -> "Actions". See bug_14.png. <asaveljevs> Moved to |
Comment by Aleksandrs Saveljevs [ 2011 Mar 31 ] |
(15) The popup in bar reports does not close itself when clicking on an item. See bug_15.png. <asaveljevs> Disregard that. This problem occurs in 1.8, too. |
Comment by Alexander Vladishev [ 2011 Apr 01 ] |
Server side tested. |
Comment by Aleksandrs Saveljevs [ 2011 Apr 05 ] |
(16) [API] Should rename "description" to "name" on http://www.zabbix.com/documentation/2.0/manual/appendix/api/item/get. The examples with "description" are probably still valid, but they are not as natural anymore. <Vedmak> changed, but as mentioned, it was valid <asaveljevs> I have also renamed "description" to "name" in "sortfield" row. If you like it, please close this comment and merge the branch. <Vedmak> Like it, CLOSED |
Comment by Alexey Fukalov [ 2011 Apr 05 ] |
trunk 18905 |
[ZBXNEXT-266] Explain Zabbix shm tuning Created: 2010 Mar 07 Updated: 2012 Aug 06 Resolved: 2012 Aug 06 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Documentation (D) |
Affects Version/s: | 1.8.2 |
Fix Version/s: | 2.0.0 |
Type: | New Feature Request | Priority: | Major |
Reporter: | Cal Sawyer | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 3 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Description |
With 1.8, several configuration paramerters have some effect on shmmax setintgs. sysctl tuning isn't somethi8ng i do often and usually with some guidance. For both server and proxy under 1.8.2, i've had to make adjustments in order to make the component run, either in server.conf or sysctl. However, there is no guidance in the documentation to assist in understanding how configuration options impact on system resources and performance and how to tune them optimally. |
Comments |
Comment by richlv [ 2012 Aug 01 ] |
a community wiki article has been created, which should solve this issue : |
Comment by Oleksii Zagorskyi [ 2012 Aug 06 ] |
Also it already mentioned at http://www.zabbix.com/documentation/2.0/manual/installation/install#installing_zabbix_daemons (a step #7) |
[ZBXNEXT-397] web scenarios running on zabbix proxies Created: 2010 Jun 03 Updated: 2014 Jun 30 Resolved: 2013 Apr 15 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Proxy (P) |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | New Feature Request | Priority: | Major |
Reporter: | Aigars | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 15 |
Labels: | webmonitoring | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Issue Links: |
|
Description |
It will be greate if "Zabbix proxy" can run web scenarios like Zabbix master server and we can centraly manage/report data from all zabbix proxy servers! Right now only way to monitor web pages in different subnets are nodes or standalone servers. |
Comments |
Comment by Tom Duijf (xs-) [ 2010 Oct 25 ] |
Any progress on this one? Excerpt from my 'duplicate' issue; --------- The reason i am filing this as a bug: proxies can be compiled with CURL support (mine are), but this is not used as far as i can see. I checked the documentation on web scenarios and proxies but cannot find anything which confirms or rejects this assumption. |
Comment by dimir [ 2012 Mar 02 ] |
(1) In src/libs/zbxdbhigh/proxy.c:398 in function get_proxy_monitored_httptests() we request httptestids of hosts in "monitored" and "not monitored" state. <Sasha> RESOLVED in r25773. <dimir> CLOSED |
Comment by Alexey Fukalov [ 2012 Mar 08 ] |
(2) [GUI] <Sasha> CLOSED |
Comment by Oleksii Zagorskyi [ 2012 Mar 10 ] |
(3) [documentation] <Sasha> Updated documentation: <zalex> I like it. CLOSED |
Comment by dimir [ 2012 Mar 12 ] |
(4) [GUI] <dimir> My bad, my db wasn't up-to-date. CLOSED |
Comment by Alexander Vladishev [ 2012 Mar 12 ] |
(5) [GUI] Your changes in r25963:25965 are successfully reviewed. Please review my changes in r25973. <dimir> CLOSED |
Comment by dimir [ 2012 Mar 12 ] |
(6) [Proxy] Web scenario macros are not properly handled in steps when processed by proxy. Generated post string looks messy. <Sasha> RESOLVED in r25999 <dimir> Great! Please review my small changes in r26007 <Sasha> CLOSED |
Comment by dimir [ 2012 Mar 13 ] |
Successfully tested. |
Comment by Alexander Vladishev [ 2012 Mar 13 ] |
Available in version pre-2.0.0rc1, revision 26022. |
Comment by Oleksii Zagorskyi [ 2012 Mar 29 ] |
Upgrade script "hosts.sql" doesn't increase "nextid" for items in the "ids" table after creating items web.test.error[...] for every web scenario. <zalex> I don't know, seems "upgrade" script performs some check with "ids" table in a function increaseid() and described above is not a problem. It's up to you, feel free to close if you like. <Sasha> RESOLVED in dev branch svn://svn.zabbix.com/branches/dev/ZBXNEXT-397 <dimir> CLOSED, feel free to merge <Sasha> MERGED to trunk in version pre-2.0.0rc3, revision 26473. |
Comment by Oleksii Zagorskyi [ 2013 Apr 15 ] |
I've just added small piece of info about new items with key web.test.error[<a scenario name>] here: |
Comment by Oleksii Zagorskyi [ 2013 Apr 16 ] |
Wrong upgrade script from this development caused a serious problem, described in |
Comment by Sean Boran [ 2014 Jun 30 ] |
I'm using 2.2.2 and can do webchecks via http proxy(this was added in 2.2 I believe?). Is this somehow possible? |
Comment by richlv [ 2014 Jun 30 ] |
please use zabbix irc, forums and other channels for community support. see https://www.zabbix.org/wiki/Getting_help for more detail. |
[ZBXNEXT-628] Support of different label format for different types of map elements Created: 2011 Jan 19 Updated: 2011 Dec 22 Resolved: 2011 Feb 10 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F) |
Affects Version/s: | 2.0.0 |
Fix Version/s: | 2.0.0 |
Type: | New Feature Request | Priority: | Major |
Reporter: | Alexei Vladishev | Assignee: | Artem Suharev (Inactive) |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Description |
It would be nice to specify icon label formats for each element type (host, host group, image, map, trigger) individually. |
Comments |
Comment by Konstantin Buravcov (Inactive) [ 2011 Feb 09 ] |
(2) Docs improved (Aly) |
Comment by Konstantin Buravcov (Inactive) [ 2011 Feb 10 ] |
Testes and reviewed. |
Comment by Artem Suharev (Inactive) [ 2011 Feb 10 ] |
Merged |
[ZBXNEXT-629] network discovery by HTTPS and TELNET Created: 2011 Jan 19 Updated: 2012 May 22 Resolved: 2011 May 02 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Proxy (P), Server (S) |
Affects Version/s: | 2.0.0 |
Fix Version/s: | 2.0.0 |
Type: | New Feature Request | Priority: | Major |
Reporter: | Alexei Vladishev | Assignee: | Alexey Fukalov |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Attachments: | bug_20.png bug_21.png bug_22.png bug_5.png bug_8.PNG |
Description |
Is would be nice to have discovery for HTTPS and Telnet services. |
Comments |
Comment by Alexander Vladishev [ 2011 Apr 16 ] |
(16) [GUI] check for a valid port range has been disappear <Vedmak> FIXED |
Comment by Alexander Vladishev [ 2011 Apr 16 ] |
(17) [GUI] Critical error. Field [druleid] is mandatory
<Vedmak> FIXED |
Comment by Alexander Vladishev [ 2011 Apr 16 ] |
(18) [GUI] check for valid item key will be added <Vedmak> FIXED |
Comment by Alexander Vladishev [ 2011 Apr 16 ] |
(19) [GUI] check for empty SNMP OID and SNMP Community will be added <Vedmak> FIXED |
Comment by Alexander Vladishev [ 2011 Apr 27 ] |
(25) [GUI] can enter a negative delay value <Vedmak> FIXED |
Comment by Rudolfs Kreicbergs [ 2011 May 03 ] |
Available in pre-1.9.4 r19332. |
Comment by Oleksii Zagorskyi [ 2012 May 22 ] |
INTERESTING - Why in the rev 19332 so many API related stuff have been changed but NOT REFLECTED in the API documentation ? Pavels just recently has fixed user.get API doc, btw thanks him for that. |
[ZBXNEXT-673] Support of users scripts on Zabbix Agent and IPMI-based remote commands Created: 2011 Feb 24 Updated: 2011 Dec 22 Resolved: 2011 Mar 08 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Agent (G), Frontend (F), Server (S) |
Affects Version/s: | 2.0.0 |
Fix Version/s: | 2.0.0 |
Type: | New Feature Request | Priority: | Major |
Reporter: | Alexander Vladishev | Assignee: | Alexei Vladishev |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Issue Links: |
|
Description |
Currently Zabbix supports execution of user scripts (defined in WEB GUI) on Zabbix Server or IPMI only. Also it would be nice to have an option for execution of the scripts on monitored hosts by Zabbix agents. |
Comments |
Comment by Alexander Vladishev [ 2011 Feb 24 ] |
The following changes must be implemented: 1) Database changes for table 'scripts', new fields must be added: FIELD |type |t_integer |'0' |NOT NULL |ZBX_SYNC type: 0 - script, 1 - IPMI 2) User script configuration form must be modified according to provided sketch. 3) Database patch for converting existing IPMI commands to new DB structure 4) Server side must be modified to support execution of scripts by Zabbix agents. 5) Commands executed by Zabbix Agents will be based on system.run[], which can be enabled or disabled by EnableRemoteCommands 6) Server must validate Host Group defined for a Script. If a host is not in the specified host group, the command will not be executed on the host. 7) API methods script.get, script.create and script.update will be updated to support new fields 'type' and 'execute_on'. |
Comment by richlv [ 2011 Feb 24 ] |
does 6 mean ability to specify single group only or multiple groups ? |
Comment by Alexander Vladishev [ 2011 Feb 25 ] |
Just one host group. (6) fixed. |
Comment by Alexey Fukalov [ 2011 Mar 08 ] |
trunk 18311 |
[ZBXNEXT-672] Advanced options for remote commands Created: 2011 Feb 24 Updated: 2011 Dec 22 Resolved: 2011 May 13 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Agent (G), Frontend (F), Server (S) |
Affects Version/s: | 2.0.0 |
Fix Version/s: | 2.0.0 |
Type: | New Feature Request | Priority: | Major |
Reporter: | Alexander Vladishev | Assignee: | Alexey Fukalov |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Attachments: | bug_1.png bug_11.png bug_13.png bug_2.png bug_3.png bug_3b.png bug_5.png bug_6.png |
Description |
Remote command should be extended to support number of additional options:
|
Comments |
Comment by Alexander Vladishev [ 2011 Feb 24 ] |
The following changes must be implemented: 1) Database changes for tables opcommand_hst and opcommand_grp. New fields: FIELD |type |t_integer |'0' |NOT NULL |ZBX_SYNC type: 0 - script, 1 - IPMI, 2 - SSH, 3 - Telnet, 4 - user script During development process, we decided to change schema requirements: other fields have same definition as for table 'items' 2) User script cannot be removed if used for actions. A clear error message should be given. 3) Action permissions must take into account user scripts.If no RW permissions for a user script, the action is not accessible in the GUI. 4) Selection of user scripts in action form should respect permissions. Can be a security issue if a script is for execution on RW hosts. 5) Action form must be modified according to provided sketch. 6) Database patch for converting existing IPMI commands to new DB structure 7) For Telnet and SSH checks username, password are used for authentication purposes. For SSH authtype, publickey, privatekey can be used as well. 8) Username, password,publickey, privatekey must support user macros. The macros are based on the target host. 9) Server side must be modified to support new command types. 10) Commands executed by Zabbix Agents will be based on system.run[], which can be enabled or disabled by EnableRemoteCommands 11) Server must validate Host Groups defined for a Script. If a host is not in the specified host group, the command will not be executed on the host. |
Comment by Alexander Vladishev [ 2011 Feb 25 ] |
12) API methods action.get, action.create and action.update will be extended to support new opcommand_hst/opcommand_grp fields. |
Comment by Alexey Fukalov [ 2011 Apr 08 ] |
trunk 18964 |
Comment by richlv [ 2011 Apr 08 ] |
database changes have not been implemented according to the specification (which in this case probably means that specification was never updated as it was changed during the development...) |
Redesign forms to MVC rails and migrate javascript from Prototype to jQuery
(ZBXNEXT-870)
[ZBXNEXT-1181] Redesign Configuration -> Hosts -> Mass update Created: 2012 Apr 11 Updated: 2017 May 31 Resolved: 2013 Jun 28 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | API (A), Frontend (F) |
Affects Version/s: | None |
Fix Version/s: | 2.0.0, 2.1.0 |
Type: | Change Request (Sub-task) | Priority: | Minor |
Reporter: | richlv | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 0 |
Labels: | hostmassupdate, hosts | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Issue Links: |
|
Comments |
Comment by richlv [ 2012 Apr 16 ] |
hmm. does the closing of this issue mean that host mass update form is fully redesigned ? |
Comment by Eduards Samersovs (Inactive) [ 2012 Apr 20 ] |
Implemented in development branch svn://svn.zabbix.com/branches/dev/ZBXNEXT-1181 |
Comment by Alexey Fukalov [ 2012 Apr 20 ] |
(1) <Eduard> CLOSED |
Comment by Eduards Samersovs (Inactive) [ 2012 Apr 20 ] |
trunk r.26998 version 2.0.0 rc3 |
Comment by richlv [ 2012 Jul 10 ] |
(2) apparently, mass update form was also changed functionally (for example, template linkage part) - but this hasn't been documented anywhere at all. all functional changes to that form should be documented here (including info on what exactly changed) |
Comment by Eduards Samersovs (Inactive) [ 2013 Jun 26 ] |
During last year in this form was some changes and now can say that this form looks pretty good. |
Comment by Oleksii Zagorskyi [ 2013 Jun 28 ] |
Resolution looks a bit scary, I fixed it as I see it logical. It's sad that several sub-issues again were ignored and not closed. |
[ZBXNEXT-1188] new item which represents internal agent's "hostname" Created: 2012 Apr 17 Updated: 2013 Sep 24 Resolved: 2012 Apr 28 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Agent (G) |
Affects Version/s: | None |
Fix Version/s: | 1.8.13, 2.0.0 |
Type: | New Feature Request | Priority: | Minor |
Reporter: | Oleksii Zagorskyi | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Issue Links: |
|
Description |
Due to the ability to set the "hostname" via Hostname or HostnameItem the actual value of an agent's hostname can be ambiguous. It would be useful to have ability to know current value (defined for example by Hostname=dummy or by HostnameItem=system.run[echo dummy-dummy]) of internal "zabbix hostname" (used to perform active checks) using passive a check. So, it's an ask to implement new feature - add new key like "agent.hostname" This would help for troubleshooting when setting up active checks for new monitored hosts. |
Comments |
Comment by richlv [ 2012 Apr 18 ] |
to clarify, this is about returning "whatever the agent would use as the 'Hostname' for active checks" |
Comment by Alexander Vladishev [ 2012 Apr 27 ] |
Available in the development branch svn://svn.zabbix.com/branches/dev/ZBXNEXT-1188 |
Comment by Alexander Vladishev [ 2012 Apr 28 ] |
(1) updated documentation: Please review. <martins-v>ok, with small grammar fixes here: <Sasha> Thanks! CLOSED |
Comment by dimir [ 2012 Apr 28 ] |
(2) Error compiling server: $ make >/dev/null <Sasha> RESOLVED in r27184:27186 <dimir> CLOSED |
Comment by dimir [ 2012 Apr 28 ] |
Successfully tested. Please review my small changes in r27189. <Sasha> CLOSED |
Comment by Alexander Vladishev [ 2012 Apr 28 ] |
Available in versions pre-1.8.13rc1 r27196 and pre-2.0.0rc4 r27198. |
Comment by Oleksii Zagorskyi [ 2013 Sep 24 ] |
We forgot to include the new key to item selection helper. |
[ZBXNEXT-1196] Redesign of install form Created: 2012 Apr 24 Updated: 2012 May 07 Resolved: 2012 May 07 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F) |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | Change Request | Priority: | Minor |
Reporter: | Toms (Inactive) | Assignee: | Toms (Inactive) |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Attachments: | setup_1.png |
Comments |
Comment by Oleksii Zagorskyi [ 2012 Apr 25 ] |
(1) [usability] The step 7 in case of success config file creation, could be more informative. I mean: The same for fail result: <Toms> RESOLVED in r27118 <zalex> Tested, CLOSED |
Comment by Oleksii Zagorskyi [ 2012 Apr 25 ] |
(2) [usability] Rename the button "Save configuration file" to "Download configuration file" <Toms> RESOLVED in r27118 <zalex> Tested, CLOSED |
Comment by Toms (Inactive) [ 2012 Apr 26 ] |
Fixed in dev. branch: svn://svn.zabbix.com/branches/dev/ZBXNEXT-1196 |
Comment by Alexey Fukalov [ 2012 Apr 26 ] |
(3) <zalex> I see the same to 1st step in Opera. <Toms> RESOLVED in r27188 <zalex> 1st step in Opera -> CLOSED. Chrome (Iron 17.0) on 3rd step worked ok for me even before r27188. |
Comment by Oleksii Zagorskyi [ 2012 Apr 26 ] |
(4) <richlv> it should depend on the db support that is available in your php installation - you should see only supported types. <zalex> Yes, after installation php5-sqlite package, SQLite3 appeared in that drop-down. Thanks. <zalex> Actually list of supported databases visible at the 3rd step in the "PHP databases support" value. <Toms> CLOSED |
Comment by Alexey Fukalov [ 2012 Apr 26 ] |
(5) Remove second step. On first step image instead of text. Increase version font size to 16 and remove "v". Add copyright text with link to license to footer. Change first step name from "Introduction" to "Welcome". <Toms> RESOLVED in r27188 <Vedmak> CLOSED |
Comment by richlv [ 2012 Apr 26 ] |
i'd suggest for the image on the 1st step not to have any text on it, and it should take ~ 2/3 of the area, leaving the rest for normal text |
Comment by Oleksii Zagorskyi [ 2012 Apr 28 ] |
who is the author of that picture? <Toms> It is temp picture <zalex> the picture in trunk r27285 is very similar |
Comment by Oleksii Zagorskyi [ 2012 Apr 28 ] |
(6) ?sid=cc77447aba07b498 should not be added to the "www.zabbix.com" and "GPL v2" links even if i logged in and opened "setup.php" page <Toms> RESOLVED in r27227 <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 May 02 ] |
(7) <Toms> RESOLVED in r27227 <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 May 02 ] |
(8)
I did that in my previous commit but it was overwritten <Toms> RESOLVED in r27227 <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 May 03 ] |
(9) |
Comment by Toms (Inactive) [ 2012 May 07 ] |
Fixed in 2.0.0 r27285 |
Comment by Oleksii Zagorskyi [ 2012 May 07 ] |
(10) Trunk r27285. In the Opera, Iron 17, Firefox 10, and I suppose other browsers all buttons at all steps are are misplaced, the same as (3) <Toms> Opera 11.62, Firefox 12.0 doesn't show this behavior. Iron in not supported by Zabbix didn't checked. <zalex> Toms, sorry, my bad. I'm updating trunk fronted using custom script where the revision and current timestamp are added to a defines line. |
Comment by Pavels Jelisejevs (Inactive) [ 2012 May 07 ] |
(11) I've reached the step where the configuration file is created, but it couldn't be created, due to the lack of permissions. That's ok, but it also displays a "Config file DB server is not equal to wizard input." error above. What in the world does that mean? Btw: "Configuration file "/opt/lampp/htdocs/zabbix/trunk/frontends/php/conf/zabbix.conf.php" created: Fail" could probably be replaced with something more human. Like "Could not create the configuration file". <Toms> Changed according to (1) <pavels> What about the weird error message? <Toms> Looks OK for me. I think these kind of things should be discussed with Rich. <Vedmak> About error message, you probably tried to install Zabbix with existing configuration file, but as setup didn't have permissions to write it, you got situation where you have old config file which differ with values you entered during setup, so it tells you that "DB server" differs. <pavels> That is should just say "Cannot overwrite the current configuration file" or something. The current message is extremely unclear. <pavels> After some discussion we've decided to remove that message, and to add a message if the configuration file exists. Something like "The current configuration file will be overwritten". It should also be highlighted somehow, maybe bold? <Toms> Will be improved in |
Redesign forms to MVC rails and migrate javascript from Prototype to jQuery
(ZBXNEXT-870)
[ZBXNEXT-904] Redesign Configuration->Screens Created: 2011 Aug 24 Updated: 2017 May 31 Resolved: 2012 Mar 13 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F) |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | Change Request (Sub-task) | Priority: | Minor |
Reporter: | Eduards Samersovs (Inactive) | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 0 |
Labels: | screens | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Attachments: | history_not_visible.png history_visible.png screen_element_selection.png | ||||||||||||||||||||||||||||||||||||
Issue Links: |
|
Description |
Edit form and screen visual constructor |
Comments |
Comment by Eduards Samersovs (Inactive) [ 2012 Feb 24 ] |
Implemented in development branch svn://svn.zabbix.com/branches/dev/ZBXNEXT-904 |
Comment by Alexey Fukalov [ 2012 Mar 01 ] |
(1) [GUI] <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Mar 01 ] |
(2) [GUI] <Eduard> CLOSED. Moved to |
Comment by Alexey Fukalov [ 2012 Mar 01 ] |
(3) [GUI] also even if we set rowspan/colspan to 1, but then move element to another empty cell, they are set to 0. <Eduard> RESOLVED, Reverted validation on rowspan and colspan.. allow 0 values. <richlv> dev branch rev 25776. attempting to save screen element with 0/0 colspans still fails : Warning. Incorrect value for field "colspan". also the mentioned reseting of span from 1 to 0 is still there <Eduard> Retry Now <Vedmak> rowspan/colspan still resets to 0 if we move element with rowspan/colspan 1. <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Mar 01 ] |
(4) [GUI] <Eduard> RESOLVED <Vedmak> now when you switch element with places, alignment is not switched. <Eduard> CLOSED. Moved to |
Comment by Alexey Fukalov [ 2012 Mar 01 ] |
(5) [GUI] <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Mar 01 ] |
(6) [GUI] <Eduard> RESOLVED <Vedmak> let's better separate validation to methods instead of long additional options to one method <Vedmak> CLOSED |
Comment by richlv [ 2012 Mar 03 ] |
(7) server info element doesn't seem to have "Vertical align" options styled like the other screen elements hmm, this seems to depend either on other elements/their layout or editing sequence, can't reproduce reliably... CLOSED for now |
Comment by richlv [ 2012 Mar 03 ] |
(8) [03/03/2012 05:57:58 AM] JavaScript - http://localhost:8883/dev/ZBXNEXT-904/screenedit.php?screenid=5&sid=96e83c42e664b647 <Eduard> It's a different issue, after merging from upstream problem resolves. |
Comment by richlv [ 2012 Mar 03 ] |
(9) adding history of events seems to break screen configuration. see the screenshot. while event history element is being edited (thus history itself is not visible), elements can be seen and dragged. https://support.zabbix.com/secure/attachment/18293/history_not_visible.png <Eduard> Same es (8) It's a different issue, move to |
Comment by richlv [ 2012 Mar 03 ] |
(10) if screen does not fit horizontally in the browser window, 'select' button for the element (while editing it) is wrapped and the input field bleeds over other columns https://support.zabbix.com/secure/attachment/18295/screen_element_selection.png <Eduard> CLOSED. Moved to |
Comment by Eduards Samersovs (Inactive) [ 2012 Mar 05 ] |
trunk r.25808 version pre-1.9.10 |
Comment by richlv [ 2012 Mar 12 ] |
(11)
$ svn up <Eduard> RESOLVED <pavels> CLOSED. |
Comment by Eduards Samersovs (Inactive) [ 2012 Mar 14 ] |
trunk r.26075 version 2.0.0rc2 |
Redesign forms to MVC rails and migrate javascript from Prototype to jQuery
(ZBXNEXT-870)
[ZBXNEXT-908] Redesign Configuration->Graphs Created: 2011 Aug 24 Updated: 2017 May 31 Resolved: 2012 Apr 18 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F) |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | Change Request (Sub-task) | Priority: | Minor |
Reporter: | Eduards Samersovs (Inactive) | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 0 |
Labels: | graphs | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Issue Links: |
|
Description |
Edit form; item ordering must be changed to the draggable one as elsewhere; also see (5) in |
Comments |
Comment by Eduards Samersovs (Inactive) [ 2012 Apr 04 ] |
Implemented in development branch svn://svn.zabbix.com/branches/dev/ZBXNEXT-908 |
Comment by Alexey Fukalov [ 2012 Apr 04 ] |
(1) <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by richlv [ 2012 Apr 04 ] |
(2) let's enable "Show working time" and "Show triggers" checkboxes by default for new graphs <Eduard> RESOLVED <richlv> dev branch rev 26651 - they still seem to be disabled by default <Eduard> Rich, you test code faster rather than I can commit to in svn )) <richlv> hey, "resolved" means "committed" |
Comment by richlv [ 2012 Apr 04 ] |
(3) in graph elements, colour codes now use lowercase (uppercase everywhere else and before) <Eduard> RESOLVED <richlv> CLOSED |
Comment by richlv [ 2012 Apr 04 ] |
(4) apparently, new graph elements now use randomised colour. <Eduard> RESOLVED <richlv> totally broken colours aren't generated anymore, but some quick colour choosing algorithm description would be still needed. <Eduard> RESOLVED <richlv> i meant some description here that we could later adapt for the zabbix manual <richlv> i believe https://zabbix.org/wiki/Docs/specs/ZBXNEXT-908 is a good place to describe the algo <Eduard> RESOLVED |
Comment by richlv [ 2012 Apr 04 ] |
(5) open a graph, save it (without changing anything). <Eduards> 5.2 - It's hard to simple resolve because in graph item array we can receive NEW items and DELETED items.. so easy way is delete and recreate all )) <richlv> for anything that won't be fixed here, please, create new issues (although they should be ZBX, not ZBXNEXT ) <richlv> won't be fixed here, split out as |
Comment by richlv [ 2012 Apr 04 ] |
(6) currently it is possible to add all kind of mixed items from templates and hosts to a single custom graph. or, to put it otherwise, if the first item to be added to a graph is from from a template, subsequent items can only be added from the same template (group & host dropdowns are disabled and provide a helpful tooltip) <Eduard> RESOLVED <Vedmak> now i cannot change item, "Critical error. Incorrect value "host_templateid" for "srcfld3" field." in opened popup. And still can create graphs with mixed items. <Eduard> RESOLVED <Vedmak> items from mixed sources can be added by updating already added items. <Eduard> RESOLVED <Vedmak> it is still possible Also, when graph created with lld created items, these items cannot be updated error in popup. <Eduard> RESOLVED <Vedmak> problem with lld created items still exists. Also, open new graph form, add template item, click save, get empty name error, remove that item, try to add another, only items from template can be added. Also, if for axis item we selected host item, we can add template items after that. <Eduard> RESOLVED <Vedmak> CLSOED |
Comment by richlv [ 2012 Apr 05 ] |
(7) it is possible to add an item twice. this was not possible in 1.8 also reported as (1) in <Eduard> Decided allow adding multiple items, because they can be configured with different functions. <richlv> CLOSED |
Comment by Alexey Fukalov [ 2012 Apr 05 ] |
(8) <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Apr 05 ] |
(9) <Eduard> RESOLVED <Vedmak> previous was fixed, but now discovered graphs names are clickable and redirect to "ERROR: No permissions to referred object or it does not exist!" <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Apr 05 ] |
(10) <Eduard> Decided not to fix, because in Preview we see a warning message. <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Apr 05 ] |
(11) <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Apr 10 ] |
(12) <Eduard> RESOLVED <Vedmak> Update still happens to wrong item. open graph, remove one item, try to update last item. <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Apr 10 ] |
(13) <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Apr 10 ] |
(14) <Eduard> RESOLVED (12) <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Apr 10 ] |
(15) <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Apr 10 ] |
(16) <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by richlv [ 2012 Apr 11 ] |
(17) set percentile value to "abc", try to save the graph - percentile is removed. it should always stay the same, never cleared <Eduard> RESOLVED <richlv> for numbers, .00 is added - but let's assume that's ok, CLOSED |
Comment by richlv [ 2012 Apr 11 ] |
(18) maybe we should limit percentile field lengths to 5 characters ? that should allow entering strings like : more precision here might not be necessary. api also should limit percentile values to 5 chars, though <Eduard> RESOLVED, precision maxlenght set to 6 to support "100.00" value. <richlv> ah, i can't count <Eduard> Decided not to fix. <richlv> frontend part closed (fix would complicate things a bit too much and it's a really minor problem), but reviewer should verify the api part as well <Vedmak> There are no API validation for such things, i think we won't implement it in this issue.. CLOSED |
Comment by richlv [ 2012 Apr 11 ] |
(19) try to save percentile as "abc" - frontend complains that it's not "double". maybe we can change that to "decimal number" ? <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Apr 11 ] |
(20) <span id="items_29_name" class="link" onclick="PopUp('popup.php?writeonly=1&dstfrm=graphForm&dstfld1=items_52_itemid&dstfld2=items_52_name&dstfld3=items_52_host_templateid' These concatenations should be removed. <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Apr 12 ] |
(21) <Eduard> RESOLVED <Vedmak> not really fixed, but decided not to fix CLOSED <richlv> probably worth specifying why this won't be fixed <Vedmak> probably too much investigation is needed. <richlv> please, split it out in a separate zbx then <Vedmak> created <richlv> CLOSED |
Comment by Alexey Fukalov [ 2012 Apr 12 ] |
(22) <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Apr 12 ] |
(23) <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Oleksii Zagorskyi [ 2012 Apr 13 ] |
(24) [usability] opened color picker should be moved a bit right. <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Apr 13 ] |
(25) <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by richlv [ 2012 Apr 13 ] |
spec draft in https://zabbix.org/wiki/Docs/specs/ZBXNEXT-908 |
Comment by Alexey Fukalov [ 2012 Apr 13 ] |
(26) <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2012 Apr 13 ] |
(27) <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexander Vladishev [ 2012 Apr 16 ] |
(28) Now we can edit templated graphs. It shouldn't be so <Eduard> RESOLVED <Sasha> REOPENED
<Eduard> RESOLVED <Sasha> CLOSED |
Comment by Alexander Vladishev [ 2012 Apr 16 ] |
(29) The link from the list of graphs opens a form of a template instead of the list of graphs from a template <Eduard> RESOLVED |
[ZBXNEXT-852] Updating host_profiles using JSON-RPC Created: 2011 Jul 18 Updated: 2012 Aug 23 Resolved: 2012 Aug 23 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | API (A) |
Affects Version/s: | 1.8.5 |
Fix Version/s: | 1.8.5, 2.0.0 |
Type: | New Feature Request | Priority: | Minor |
Reporter: | Wiktor Klosowski | Assignee: | Alexei Vladishev |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Attachments: | class.chostdetails.php class.czbxrpc.patch zabbix_host_profile.py |
Description |
How about adding function, which will updating host_profiles, to JSON-RPC API? |
Comments |
Comment by richlv [ 2012 Aug 23 ] |
this should be available since 2.0 |
Redesign forms to MVC rails and migrate javascript from Prototype to jQuery
(ZBXNEXT-870)
[ZBXNEXT-907] Redesign Configuration->Application Created: 2011 Aug 24 Updated: 2017 May 31 Resolved: 2011 Nov 23 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F) |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | Change Request (Sub-task) | Priority: | Minor |
Reporter: | Eduards Samersovs (Inactive) | Assignee: | Alexei Vladishev |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Description |
Edit form |
Comments |
Comment by Eduards Samersovs (Inactive) [ 2011 Nov 15 ] |
Implemented in development branch svn://svn.zabbix.com/branches/dev/ZBXNEXT-907 |
Comment by richlv [ 2011 Nov 15 ] |
(1) try to create an application with the same name : Application [z] already exists square brackets should be changed to doublequotes, trailing dot is missing <Eduard> RESOLVED <richlv> CLOSED |
Comment by richlv [ 2011 Nov 15 ] |
(2) edit a list of applications on a host with some applications coming from a template. click on template name - this goes to the application list for that template. edit an application here, change it's name, save. <Eduard> RESOLVED <richlv> what about committing ? <richlv> CLOSED |
Comment by Alexey Fukalov [ 2011 Nov 15 ] |
(3) [GUI] <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by Alexey Fukalov [ 2011 Nov 15 ] |
(4) [GUI] <Eduard> RESOLVED <Vedmak> Now when "Not selected" is set, all applications are shown. <Eduard> RESOLVED <Vedmak> CLOSED |
Comment by richlv [ 2011 Nov 15 ] |
(5) unittests must be added/updated - especially see things like header above (3) ... <Eduard> RESOLVED |
Comment by Eduards Samersovs (Inactive) [ 2011 Nov 23 ] |
revision 23467, 23464 |
Redesign forms to MVC rails and migrate javascript from Prototype to jQuery
(ZBXNEXT-870)
[ZBXNEXT-906] Redesign Configuration->Host groups Created: 2011 Aug 24 Updated: 2017 May 31 Resolved: 2011 Nov 30 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F) |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | Change Request (Sub-task) | Priority: | Minor |
Reporter: | Eduards Samersovs (Inactive) | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Description |
Edit form |
Comments |
Comment by Eduards Samersovs (Inactive) [ 2011 Nov 10 ] |
Implemented in development branch svn://svn.zabbix.com/branches/dev/ZBXNEXT-906 |
Comment by Igor Danoshaites (Inactive) [ 2011 Nov 15 ] |
<Igor> For example, in the drop-down is "Activate selected hosts", but in the confirmation dialog box is "Enable selected hosts groups ?". <Igor> CLOSED, now we are using "Activate selected" message. (2) In the confirmation dialog box should be "Disable selected hosts" instead of "Disable selected host groups". <richlv> but we don't have any hosts selected <igor> Yes, we do not have any hosts selected, only hosts groups, but host groups can not be disabled. Yes, second variant is too long. <Eduard> RESOLVED <Igor> CLOSED, now in the confirmation dialog box we are using message "Disable hosts in the selected host groups". |
Comment by Igor Danoshaites (Inactive) [ 2011 Nov 16 ] |
(3) When using Error in query [SELECT n.nodeid AS nodeid,n.name AS node_name,g.*,0AS permission FROM groups g LEFT JOIN nodes n ON (g.groupid div 100000000000000)=n.nodeid WHERE g.groupid BETWEEN 000000000000000 AND 099999999999999 ORDER BY n.name,g.name] [Unknown column '0AS' in 'field list'] But in trunk branch the same problem is not reproducible. Something wrong with this dev branch (Unknown column '0AS') ? <Eduard> RESOLVED <Igor> CLOSED |
Comment by Igor Danoshaites (Inactive) [ 2011 Nov 16 ] |
(4) Maybe it is better to replace message "Group added" (that appears in the info bar after adding new host group or after cloning existing host group) with " "X" Group added", where "X" is name of the added host group ? <Eduard> Decided not to do <Igor> CLOSED, this behaviour is the same when creating (adding) new host. |
Comment by Aleksandrs Saveljevs [ 2011 Nov 23 ] |
(5) Some messages are not translated, some are split into several parts: $ grepphp incorrect.user.data <Eduard> RESOLVED <asaveljevs> CLOSED |
Comment by Aleksandrs Saveljevs [ 2011 Nov 24 ] |
(6) New PHP files have old FSF postal address. <Eduard> RESOLVED <asaveljevs> CLOSED |
Comment by Aleksandrs Saveljevs [ 2011 Nov 24 ] |
(7) New PHP files don't have svn:eol-style property set to native. <Eduard> RESOLVED <asaveljevs> CLOSED |
Comment by Aleksandrs Saveljevs [ 2011 Nov 25 ] |
(8) There was a problem syncing with trunk. I have found one problem, but there might be other problems, too. <asaveljevs> File services_form.php is not present in trunk and should have been deleted in development branch. However, the file is still present in the branch. That means it will be added to trunk when the branch is reintegrated. <Eduard> RESOLVED |
Comment by Eduards Samersovs (Inactive) [ 2011 Nov 30 ] |
trunk revision 23620 |
Redesign forms to MVC rails and migrate javascript from Prototype to jQuery
(ZBXNEXT-870)
[ZBXNEXT-1113] Redesign Configuration->Discovery Rules Created: 2012 Feb 10 Updated: 2017 May 31 Resolved: 2012 Feb 17 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F) |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | Change Request (Sub-task) | Priority: | Minor |
Reporter: | Eduards Samersovs (Inactive) | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Comments |
Comment by Eduards Samersovs (Inactive) [ 2012 Feb 17 ] |
Implemented in development branch svn://svn.zabbix.com/branches/dev/ZBXNEXT-1113 |
Comment by Eduards Samersovs (Inactive) [ 2012 Feb 20 ] |
trunk r.25463 version pre-1.9.10 |
Redesign forms to MVC rails and migrate javascript from Prototype to jQuery
(ZBXNEXT-870)
[ZBXNEXT-909] Redesign Configuration->Discovery Created: 2011 Aug 24 Updated: 2017 May 31 Resolved: 2012 Feb 03 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F) |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | Change Request (Sub-task) | Priority: | Minor |
Reporter: | Eduards Samersovs (Inactive) | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Attachments: | screenshot-1.jpg screenshot-2.jpg screenshot-3.jpg screenshot-4.jpg screenshot-5.jpg |
Description |
Edit form |
Comments |
Comment by Eduards Samersovs (Inactive) [ 2012 Feb 02 ] |
Implemented in development branch svn://svn.zabbix.com/branches/dev/ZBXNEXT-909 |
Comment by Alexander Vladishev [ 2012 Feb 02 ] |
(1) Please review my changes in r25169. <Eduard> CLOSED |
Comment by Alexander Vladishev [ 2012 Feb 02 ] |
(2) [F] аt not successful saving all new discovery checks disappear "new" button becomes unclickable <Eduard> RESOLVED |
Comment by Alexander Vladishev [ 2012 Feb 02 ] |
(3) [F] discovery checks disappear if save discovery rule with "Device uniqueness criteria" = "<discovery check>" <Eduard> RESOLVED |
Comment by Alexander Vladishev [ 2012 Feb 02 ] |
(4) [AF] cannot delete a discovery rule Related issue: <Eduard> RESOLVED <Sasha> REOPENED SQL statement at include/discovery.inc.php:186 should be fixed too. <Eduard> RESOLVED <Sasha> CLOSED |
Comment by Alexander Vladishev [ 2012 Feb 02 ] |
(5) [F] Cannot delete a discovery rule from a form - 'Delete' button disabled <Eduard> RESOLVED |
Comment by Alexander Vladishev [ 2012 Feb 03 ] |
(6) аt not successful saving "key" and "SNMP OID" values disappear <Eduard> RESOLVED |
Comment by Eduards Samersovs (Inactive) [ 2012 Feb 03 ] |
trunk r.25197 version pre-1.9.10 |
[ZBXNEXT-589] automated Zabbix testing Created: 2010 Dec 17 Updated: 2011 Mar 02 Resolved: 2010 Dec 17 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | None |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | Change Request | Priority: | Minor |
Reporter: | richlv | Assignee: | Alexei Vladishev |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Description |
generic catch-all issue for minor automated testing improvements |
Comments |
Comment by richlv [ 2010 Dec 17 ] |
...and no need to keep it open |
Comment by richlv [ 2010 Dec 17 ] |
reopen to change "fix for" |
Comment by richlv [ 2011 Mar 02 ] |
and probably ZBXNEXT-686 should be used from now on |
[ZBXNEXT-863] Rename "profile" to "inventory" for host inventories Created: 2011 Jul 26 Updated: 2011 Dec 22 Resolved: 2011 Aug 05 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Agent (G), Frontend (F), Server (S) |
Affects Version/s: | 2.0.0 |
Fix Version/s: | 2.0.0 |
Type: | New Feature Request | Priority: | Minor |
Reporter: | dimir | Assignee: | dimir |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Description |
Rename "profile" to "inventory" for host inventories in:
Document API changes. We agreed not to apply any changes to XML Export/Import as it's currently broken and would require a somewhat re-write. |
Comments |
[ZBXNEXT-286] Configuring templates does not provide good navigation/overview Created: 2010 Feb 18 Updated: 2014 Jan 14 Resolved: 2014 Jan 14 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F) |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | Change Request | Priority: | Minor |
Reporter: | svenw | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 0 |
Labels: | frontend, trivial, usability | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Description |
i am editing the items of a template, and i get a navigation bar like this: Templates list Applications (0) Triggers (28) Graphs (10) Template: Template_xxx_Linux whatever category (items/triggers/..) i edit, this display changes. i never have a link to modify the template itself (like template name) from there. i'd suggest having a fixed line there, with elements in fixed order, just current view being no link and bold or smth. also the page titel "Configuration of items" could mention the context like "configuration of items of Template_Linux" |
Comments |
Comment by richlv [ 2010 Mar 31 ] |
note that displayed items are affected by the filter and subfilter, thus "configuration of items of Template_Linux" might not be feasible - and would be visible in the row header and filter itself already |
Comment by Marc [ 2013 Dec 22 ] |
Isn't it already implemented? |
Comment by richlv [ 2014 Jan 13 ] |
this is available now, but to close this issue we should find out which exact version offered this functionality |
Comment by Oleksii Zagorskyi [ 2014 Jan 14 ] |
note - it has been implemented in 2.0.0 ! |
Comment by richlv [ 2014 Jan 14 ] |
should be fixed in 2.0.0, closing |
[ZBXNEXT-54] Make graphics legend optional Created: 2009 Aug 24 Updated: 2011 Dec 22 Resolved: 2010 Oct 19 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | None |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | Change Request | Priority: | Minor |
Reporter: | Vide | Assignee: | Artem Suharev (Inactive) |
Resolution: | Fixed | Votes: | 9 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Issue Links: |
|
Description |
Please make the graphs legend optional, cause when you have a graph with lot of items the legend takes lot of vertical estate and makes screens less usable when you just want to have a quick look. Thanks. |
Comments |
Comment by Cal Sawyer [ 2009 Sep 10 ] |
To add to this - ability to create arbitrary legend information |
Comment by Billy Vierra [ 2009 Nov 27 ] |
I also am requesting this... I have a stacked graph with 40 different Items in it and with he legend the graph becomes unusable |
Comment by Simon DOe [ 2010 Feb 07 ] |
I also am requesting this... having problems with only 3 graphs.. they just hve up to 6 lines and legend is 6 lines also... i would need 1 legend only for all 3 graphs to fit on 1024x768 dublicates: so it seems hostname is also repeated information... like: for like 12 graphs.. and undublicated. PS: for me this is not "minor".. im going to seek for another solution than zabbix without this issue |
Comment by Alexey Fukalov [ 2010 Sep 13 ] |
dev branch: |
Comment by richlv [ 2010 Sep 13 ] |
there seems to be a serious regression - all custom graphs now are rendered w/o legend. |
Comment by Alexey Fukalov [ 2010 Sep 14 ] |
fixed default legend state. Did you apply patch for graphs table? In old dbschema legend was off by default. |
Comment by richlv [ 2010 Sep 15 ] |
confirming the fix in dev branch rev 14467. talking about dbpatch... 1. there are no commits listed in this issue, exercise for the reader - why the hell is that ? given current time and my location i will avoid from commenting on this any more. |
Comment by Artem Suharev (Inactive) [ 2010 Oct 20 ] |
Merged |
[ZBXNEXT-1112] Updated API Proxy methods Created: 2012 Feb 09 Updated: 2013 Dec 29 Resolved: 2013 Dec 28 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | API (A) |
Affects Version/s: | 1.8.10 |
Fix Version/s: | 2.0.0 |
Type: | New Feature Request | Priority: | Minor |
Reporter: | Ryan | Assignee: | Alexei Vladishev |
Resolution: | Fixed | Votes: | 0 |
Labels: | patch, proxy | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified | ||
Environment: |
CentOS PHP5.2 |
Attachments: | class.cproxy.php.patch |
Description |
Proxy API only support the get() method. This patch include support for create() and update() as well. It has been tested on 1.8.4, 1.8.6 and 1.8.10. |
Comments |
Comment by richlv [ 2013 Dec 28 ] |
this was added in zabbix 2.0, but i can't find which exact issue handled that |
[ZBXNEXT-502] Need a feature to easily find new lines when editing the localization Created: 2010 Aug 31 Updated: 2011 Mar 16 Resolved: 2011 Mar 16 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F) |
Affects Version/s: | 1.8.4 |
Fix Version/s: | 2.0.0 |
Type: | Change Request | Priority: | Minor |
Reporter: | Oleksii Zagorskyi | Assignee: | Alexei Vladishev |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified | ||
Environment: |
last trunk rev. |
Description |
One feels that the recently improved interface to create a localization, but here to update the localization of something missing. Well, I like never translate new added lines in the interface Zabbix because they find very difficult - almost impossible. I am using for this TurtoiseMerge utility . I opened an old file and a new downloaded and easy to move only on the changes. I think you can add a up and down buttons (centered always on top) to scroll the window and switch the input focus on the rows that are empty or filled in by default value (english usual). Thus, these lines can highlight a different color. |
Comments |
Comment by richlv [ 2010 Aug 31 ] |
it is planned to move to gettext for 2.0, so it probably wouldn't make much sense to put lot of work into polishing current custom interface. |
Comment by Oleksii Zagorskyi [ 2010 Aug 31 ] |
I have already used Pootle - this is nice solutions. I vote to move to it |
Comment by richlv [ 2011 Mar 16 ] |
with gettext for 2.0, can this be closed ? |
Comment by Oleksii Zagorskyi [ 2011 Mar 16 ] |
Of course, it seems "Fixed" for 2.0 resolution is optimal. |
[ZBXNEXT-1157] remote Command via right click on menu Created: 2012 Mar 20 Updated: 2012 Mar 20 Resolved: 2012 Mar 20 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F) |
Affects Version/s: | 1.8.9 |
Fix Version/s: | 2.0.0 |
Type: | New Feature Request | Priority: | Minor |
Reporter: | Gavin Balaam | Assignee: | Alexei Vladishev |
Resolution: | Fixed | Votes: | 0 |
Labels: | maps, remotecommands | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Description |
I'd like to be able to run remote commands via a right click option. Currently the only options are those that are run local to the zabbix server. The reason being that we have a scenario that causes an alert, and we have remote commands that we can run to resolve the issue, but we are not yet ready for that to be fully automated. |
Comments |
Comment by richlv [ 2012 Mar 20 ] |
probably not remote commands, but global/frontend scripts; anyway, it will be possible to run frontend scripts either on the agent or server in 2.0 |
Redesign forms to MVC rails and migrate javascript from Prototype to jQuery
(ZBXNEXT-870)
[ZBXNEXT-914] Redesign Administration->DM Created: 2011 Aug 24 Updated: 2017 May 31 Resolved: 2012 Apr 12 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F) |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | Change Request (Sub-task) | Priority: | Minor |
Reporter: | Eduards Samersovs (Inactive) | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 0 |
Labels: | distributed | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Attachments: | administration-authentication.png dm-node.png | ||||||||||||
Issue Links: |
|
Description |
Edit form |
Comments |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Mar 13 ] |
(1) When creating a new node, the "Type" select doesn't have the "Master" option. <Eduard> RESOLVED <pavels> Now the "Master node" select is missing for child nodes. <Eduard> Because you don't have master yet.. <pavels> But we should be able to add child nodes using the local node as the master. <Eduard> RESOLVED <pavels> CLOSED. |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Mar 13 ] |
(2) When trying to create a node with the node id "0", the error message just says "ERROR: Cannot add node". I think we should add the "Warning. Incorrect value for field "ID"." message. <Eduard> RESOLVED <pavels> CLOSED. |
Comment by Alexei Vladishev [ 2012 Mar 13 ] |
(3) Unable to link 1500 or more hosts in Proxy management form. <Eduard> RESOLVED sorting, but actually can't repeat bug. <pavels> This seems to be caused by the max_input_vars parameter or it's Suhosin analog. It will be fixed as a separate issue. CLOSED. |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Mar 13 ] |
(4) When I'm trying to edit a created node, the form looks weird. Note the error message, the duplicating "Name" fields and the "Master node" text. See https://support.zabbix.com/secure/attachment/18327/dm-node.png <Eduard> RESOLVED <pavels> We shouldn't be able to change the type of the node after it's created. <Eduard> RESOLVED <pavels> CLOSED. |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Mar 13 ] |
(5) When I'm trying to create a passive proxy with a DNS interface without a DNS address, an error occurs: Undefined index: 10173 [api/classes/CHostInterface.php:537] Note, that the last message is missing the proxy name. <Eduard> RESOLVED <pavels> The same error message for hosts says "Interface with IP "127.0.0.1" cannot have empty DNS name while having "Use DNS" property on "%HOSTNAME%". Let's make it consistent. <Eduard> RESOLVED <pavels> CLOSED. |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Mar 13 ] |
(6) When trying creating a proxy without a "Proxy name" the error message reads "Warning. Incorrect value for field "host".". It should be "Warning. Incorrect value for field "proxy name".". <Eduard> RESOLVED <pavels> CLOSED. <pavels> REOPENED: same thing when trying to create a proxy with an existing name: "Host "1" already exists." <Eduard> RESOLVED <pavels> CLOSED. |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Mar 13 ] |
(7) History seems to be broken. <Eduard> RESOLVED <pavels> History is missing from Administration - General. This seems to have been broken in the trunk sometime earlier. <Eduard> RESOLVED <pavels> History should have a link to a specific configuration page, not just a single "Configuration of Zabbix" link. <Eduard> RESOLVED <pavels> I've changed the title of General / Other to "Other configuration parameters", it's more correct. CLOSED. |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Mar 13 ] |
(8) The layout of administration/authentication and some other pages is broken in firefox https://support.zabbix.com/secure/attachment/18328/administration-authentication.png <Eduard> RESOLVED <pavels> CLOSED. |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Mar 13 ] |
(9) The navigation menu is missing from the graph, application and screen forms. <Eduard> Applications, Screens RESOLVED. For Graphs I will do it in <pavels> CLOSED. |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Mar 13 ] |
(10) It would be really great, if your current location in the navigation menu would be either highlighted, or displayed as text instead of link. <Eduard> RESOLVED (current location will be without link) <pavels> Doesn't work in the list of discovery rules and item prototype form. <Eduard> RESOLVED, same as (14) <pavels> Noup, still doesn't work. <Eduard> RESOLVED <pavels> Still doesn't work in the item prototype form, and in the discrovery form items are highlighted instead of discoveries. <Eduard> RESOLVED <pavels> CLOSED. |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Mar 13 ] |
(11) Since you've also fixed page headers, there's one small issue. The header on monitoring/events reads "HISTORY OF EVENTS ON 13 Mar 2012 15:48:42" while on the trigger status page - "STATUS OF TRIGGERS [13 Mar 2012 15:51:23]". It should be unified. <Eduard> RESOLVED <pavels> CLOSED. |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Mar 14 ] |
(12) A couple of code issues: 1. CDiscoveryRule already has a "selectPrototypes" option, there's no need for "selectItems"; <Eduard> RESOLVED <pavels> CLOSED. |
Comment by richlv [ 2012 Mar 14 ] |
apparently, the work is happening in svn://svn.zabbix.com/branches/dev/ZBXNEXT-914 |
Comment by richlv [ 2012 Mar 14 ] |
(13) apparently the trailing dot is missing for "Incorrect interface port "10051eee" provided" <Eduard> RESOLVED <pavels> CLOSED. |
Comment by Oleksii Zagorskyi [ 2012 Mar 15 ] |
(14) dev branch r26073 tested. When I click and open some discovery rule properties then I cannot click to a link "Item prototypes (2)" because it's not a hyper-link but just simple text. <Eduard> RESOLVED <zalex> Successful tested, CLOSED. |
Comment by Oleksii Zagorskyi [ 2012 Mar 15 ] |
(15) according our discussion related to <Eduard> RESOLVED |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Mar 16 ] |
(16) The node select is missing from the top of the page. <Eduard> RESOLVED <pavels> CLOSED. |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Mar 16 ] |
(17) A "S_STATUS_OF_ZABBIX" string appears in the history. <Eduard> Seems it was saved in your profile, please re-test it now.. <pavels> Yep, it's ok now. CLOSED. |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Mar 19 ] |
(18) Please review my changes in r26175. <Eduard> Ok, CLOSED |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Mar 20 ] |
TESTED. |
Comment by Eduards Samersovs (Inactive) [ 2012 Mar 20 ] |
trunk r.26226 version 2.0.0.rc2 |
Comment by richlv [ 2012 Apr 10 ] |
interestingly, this has broken map editing in opera (11.61, linux) adding a new element now fails. error console just reports : "Syntax error at line 1 in event handler: expected expression, got <end of file>" this was broken in revision r26226 <Eduard> RESOLVED in <richlv> problem gone in the dev branch, rev 26799; leaving as is for code review |
Redesign forms to MVC rails and migrate javascript from Prototype to jQuery
(ZBXNEXT-870)
[ZBXNEXT-913] Redesign Configuration->IT services Created: 2011 Aug 24 Updated: 2017 May 31 Resolved: 2011 Nov 23 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F) |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | Change Request (Sub-task) | Priority: | Minor |
Reporter: | Eduards Samersovs (Inactive) | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Attachments: | service-tree.jpg | ||||||||||||||||||||
Issue Links: |
|
Description |
Edit form |
Comments |
Comment by Eduards Samersovs (Inactive) [ 2011 Nov 08 ] |
Implemented in development branch svn://svn.zabbix.com/branches/dev/ZBXNEXT-913 |
Comment by Eduards Samersovs (Inactive) [ 2011 Nov 23 ] |
trunk revision 23470 |
Redesign forms to MVC rails and migrate javascript from Prototype to jQuery
(ZBXNEXT-870)
[ZBXNEXT-1107] Redesign Administration->Audit Created: 2012 Feb 06 Updated: 2017 May 31 Resolved: 2012 Feb 09 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Documentation (D) |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | Change Request (Sub-task) | Priority: | Minor |
Reporter: | Eduards Samersovs (Inactive) | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Comments |
Comment by Eduards Samersovs (Inactive) [ 2012 Feb 09 ] |
Implemented in development branch svn://svn.zabbix.com/branches/dev/ZBXNEXT-1107 |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Feb 20 ] |
(1) Please review my changes in r25458. <Eduard> Ok. CLOSED |
Comment by Pavels Jelisejevs (Inactive) [ 2012 Feb 20 ] |
If (1) is ok, you can merge. TESTED. |
Comment by Eduards Samersovs (Inactive) [ 2012 Feb 20 ] |
trunk r.25460, r.25461 version pre-1.9.10 |
Redesign forms to MVC rails and migrate javascript from Prototype to jQuery
(ZBXNEXT-870)
[ZBXNEXT-899] Redesign Administration->General->Images Created: 2011 Aug 23 Updated: 2017 May 31 Resolved: 2011 Aug 31 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | None |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | Change Request (Sub-task) | Priority: | Trivial |
Reporter: | Eduards Samersovs (Inactive) | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Comments |
Comment by Eduards Samersovs (Inactive) [ 2011 Aug 30 ] |
Implemented in development branch svn://svn.zabbix.com/branches/dev/ZBXNEXT-899 |
Comment by Eduards Samersovs (Inactive) [ 2011 Sep 06 ] |
trunk revision 21514 |
Redesign forms to MVC rails and migrate javascript from Prototype to jQuery
(ZBXNEXT-870)
[ZBXNEXT-1126] Redesign Script execution Created: 2012 Feb 17 Updated: 2018 Oct 26 Resolved: 2012 Apr 18 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Frontend (F) |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | Change Request (Sub-task) | Priority: | Trivial |
Reporter: | Eduards Samersovs (Inactive) | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Comments |
Comment by Alexander Vladishev [ 2012 Apr 17 ] |
(1) Incorrect link to parent trigger prototype in a trigger prototype form <Eduard> RESOLVED |
Comment by Alexander Vladishev [ 2012 Apr 17 ] |
(2) Sorting doesn't work by "Commands" in Administration->Scripts <Eduard> RESOLVED |
Comment by Alexander Vladishev [ 2012 Apr 17 ] |
(3) Script errors from Zabbix server should be displayed in the header <Eduard> RESOLVED <Sasha> CLOSED |
Comment by Eduards Samersovs (Inactive) [ 2012 Apr 17 ] |
Implemented in development branch svn://svn.zabbix.com/branches/dev/ZBXNEXT-1126 |
Comment by Alexander Vladishev [ 2012 Apr 17 ] |
Successfully tested! |
Comment by Eduards Samersovs (Inactive) [ 2012 Apr 17 ] |
trunk r.26914 version 2.0 rc3 |
Comment by Oleksii Zagorskyi [ 2012 Apr 18 ] |
Reopened to set correct Fix version/s |
Comment by Oleksii Zagorskyi [ 2012 Apr 18 ] |
hmm, 2.0.0rc3 is not available already. |
Comment by richlv [ 2018 Oct 26 ] |
This issue has been used to alter the configuration wizard, which is not reflected in the issue, commit message or elsewhere. |
[ZBXNEXT-744] New macros for notifications: ITEM.ID and TRIGGER.EXPRESSION Created: 2011 Apr 13 Updated: 2012 Mar 23 Resolved: 2012 Mar 20 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | None |
Affects Version/s: | None |
Fix Version/s: | 1.8.12, 2.0.0 |
Type: | Change Request | Priority: | Trivial |
Reporter: | Will Lowe | Assignee: | Unassigned |
Resolution: | Fixed | Votes: | 3 |
Labels: | macros | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Issue Links: |
|
Description |
I'd like to see an ITEM.ID macro so that we could include URLs to history graphs in alert messages, e.g.: /history.php?action=showgraph&itemid= {ITEM.ID}This would vastly improve our workflow. |
Comments |
Comment by João Figueiredo [ 2011 Jun 30 ] |
This would be quite useful to quickly get a view of the event evolution without manually navigating through the interface. |
Comment by Marcin Gapiński [ 2011 Nov 03 ] |
I concur, I was actually surprised when I found out that there's no such macro yet |
Comment by Alexander Vladishev [ 2012 Mar 20 ] |
Available in the development branch svn://svn.zabbix.com/branches/dev/ZBXNEXT-744 |
Comment by Alexander Vladishev [ 2012 Mar 20 ] |
Updated documentation: <richlv> also added this info in http://www.zabbix.com/documentation/1.8/manual/about/what_s_new_1.8.12 <zalex> interesting, will be the macro TRIGGER.EXPRESSION exploded to item names and trigger function? If yes, I think it worth to add one word "exploded" or so to the documentation. <Sasha> It's an user documentation. About the collapsed trigger expression user shouldn't know. It will mislead. |
Comment by dimir [ 2012 Mar 20 ] |
Fix Summary |
Comment by Oleksii Zagorskyi [ 2012 Mar 20 ] |
Rich, Sasha, would be nice to remove 1.8.2 from Fix Version/s <richlv> removed |
Comment by dimir [ 2012 Mar 20 ] |
Successfully tested! |
Comment by Alexander Vladishev [ 2012 Mar 20 ] |
Available in version pre-1.8.12, revision 26242. |
Comment by dimir [ 2012 Mar 21 ] |
Reassign. |
Comment by Alexander Vladishev [ 2012 Mar 21 ] |
Trunk: available in development branch svn://svn.zabbix.com/branches/dev/ZBXNEXT-744 |
Comment by dimir [ 2012 Mar 21 ] |
Tested, perfect! |
Comment by Alexander Vladishev [ 2012 Mar 21 ] |
Available in version pre-2.0.0, revision 26293. |
[ZBXNEXT-664] JSONRPC web tool Created: 2011 Feb 17 Updated: 2017 May 31 Resolved: 2011 Feb 18 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | API (A) |
Affects Version/s: | None |
Fix Version/s: | 2.0.0 |
Type: | Change Request | Priority: | Trivial |
Reporter: | Alexey Fukalov | Assignee: | Alexei Vladishev |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Comments |
Comment by Alexey Fukalov [ 2011 Feb 18 ] |
moved to trunk/misc/jsonrpctool |
[ZBXNEXT-858] Template for monitoring of zabbix health Created: 2011 Jul 21 Updated: 2012 May 08 Resolved: 2012 May 08 |
|
Status: | Closed |
Project: | ZABBIX FEATURE REQUESTS |
Component/s: | Server (S) |
Affects Version/s: | 1.8.5 |
Fix Version/s: | 2.0.0 |
Type: | New Feature Request | Priority: | Trivial |
Reporter: | Marc Schoechlin | Assignee: | Alexei Vladishev |
Resolution: | Fixed | Votes: | 0 |
Labels: | None | ||
Remaining Estimate: | Not Specified | ||
Time Spent: | Not Specified | ||
Original Estimate: | Not Specified |
Description |
Hi, provide a template which monitors the internal health of the zabbix server/zabbix proxies. I discovered that zabbix is capable to monitor itself (see chapter "19.8 Internal checks" of the documentation wiki) - provide a standard Probably the template provided at http://blog.zabbix.com/monitoring-how-busy-zabbix-processes-are/457/ is a good point to start. Regards Marc |
Comments |
Comment by richlv [ 2011 Jul 21 ] |
most of the internal items are only supported since 1.8.5, so not importing on 1.8.4 isn't a huge problem |
Comment by Igor Danoshaites (Inactive) [ 2011 Jul 22 ] |
Mail from Marc Schoechlin: Hi, thanks for the hint - time to upgrade..... I think it's a good idea to add such a template in the zabbix distribution.... Regards |
Comment by Marc Schoechlin [ 2011 Jul 22 ] |
Upgraded to 1.8.5 - but it´s not possible to import the zabbix template http://blog.zabbix.com/wp-content/uploads/2011/03/template_zabbix_server.xml. 1.) I select the template in the import dialog |
Comment by richlv [ 2012 May 08 ] |
2.0.0 will have internal monitoring template included, closing |