-
Problem report
-
Resolution: Commercial support required
-
Trivial
-
None
-
None
smart by zabbix agent2 active reports tons of "some commands to the disk failed" about virtual disks on my Kubernetes nodes. Do you think it would be possible for Zabbix agent2 to ignore virtual disks that cannot be monitored?
root@dpcl090:/etc/sudoers.d# lsscsi [0:0:0:0] disk ATA Samsung SSD 860 4B6Q /dev/sda [1:0:0:0] disk ATA Samsung SSD 860 4B6Q /dev/sdc [3:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sdb [6:0:0:0] disk Generic MassStorageClass 0904 /dev/sdd [7:0:0:0] storage IET Controller 0001 - [7:0:0:1] disk IET VIRTUAL-DISK 0001 /dev/sde [8:0:0:0] storage IET Controller 0001 - [8:0:0:1] disk IET VIRTUAL-DISK 0001 /dev/sdf [11:0:0:0] storage IET Controller 0001 - : : [26:0:0:0] storage IET Controller 0001 - [26:0:0:1] disk IET VIRTUAL-DISK 0001 /dev/sdx [27:0:0:0] storage IET Controller 0001 - [27:0:0:1] disk IET VIRTUAL-DISK 0001 /dev/sdy
root@dpcl090:/etc/sudoers.d# smartctl -a /dev/sde -j
{
"json_format_version": [
1,
0
],
"smartctl": {
"version": [
7,
4
],
"pre_release": false,
"svn_revision": "5530",
"platform_info": "x86_64-linux-6.1.0-26-amd64",
"build_info": "(local build)",
"argv": [
"smartctl",
"-a",
"/dev/sde",
"-j"
],
"exit_status": 4
},
"local_time": {
"time_t": 1731818979,
"asctime": "Sun Nov 17 05:49:39 2024 CET"
},
"device": {
"name": "/dev/sde",
"info_name": "/dev/sde",
"type": "scsi",
"protocol": "SCSI"
},
"scsi_vendor": "IET",
"scsi_product": "VIRTUAL-DISK",
"scsi_model_name": "IET VIRTUAL-DISK",
"scsi_revision": "0001",
"scsi_version": "SPC-3",
"user_capacity": {
"blocks": 10485760,
"bytes": 5368709120
},
"logical_block_size": 512,
"scsi_lb_provisioning": {
"name": "thin provisioned",
"value": 2,
"management_enabled": {
"name": "LBPME",
"value": -1
},
"read_zeros": {
"name": "LBPRZ",
"value": 1
}
},
"rotation_rate": 0,
"logical_unit_id": "0x30000001000000010x60000000000000000e00000000010001",
"serial_number": "beaf11",
"device_type": {
"scsi_terminology": "Peripheral Device Type [PDT]",
"scsi_value": 0,
"name": "disk"
},
"smart_support": {
"available": true,
"enabled": false
},
"temperature_warning": {
"enabled": false
},
"smart_status": {
"passed": true
},
"temperature": {
"current": 0,
"drive_trip": 0
},
"seagate_farm_log": {
"supported": false
}
}
Please note that all the "usual stuff" like error counts, log entries, self test results etc of real disks is missing for virtual disks.
Platform is Debian 12. Zabbix agent is version 6.4, installed from Zabbix' repository. The most recent templates about smart have been imported.
